- DL manuals
- Magnavox
- Home Theater System
- Magnavox MRD410B/F7
- Owner's Manual
Magnavox Magnavox MRD410B/F7 Owner's Manual - Introduction
10
INTRODUCTION
1. Displays repeat icon. (Appears during repeat playback.)
2. Displays media mode icon (disc mode or SD card mode).
3. Displays playback status icon. Refer to table A below.
4. Displays source mode status (refer to table B below) or information such as title number, elapsed playing time,
repeat type, menu type, etc.
• When switching the source mode, the following will be displayed. e.g.) 1 2 3 4 * Brightness of the display can be adjusted. Refer to “Panel Display” in “List of Setup Menus” on page 40. Playback status icon Mode Playback is in progress Stop mode Pause mode Fast forward mode Tuning radio station (in FM mode) Fast reverse mode Tuning radio station (in FM mode) Slow forward mode Display Mode “Disc / SD” mode “MP3 Line-in” mode (Frequency of radio station will be displayed.) Disc is being played back. Indicating the current title number and the elapsed time. Current chapter is in chapter repeat mode during playback of disc. Loading a disc and the unit is in Disc / SD card mode. Dolby Digital audio is being played back during playback of disc. DTS audio is being played back during playback of disc. Read your owner’s manual first for quick tips that make using your magnavox product more enjoyable. If you have read assistance, you may access our online help at http://www.Funai-corp.Com or call 1-800-605-8610 while with your product (and model / serial number) owner’s manual guide d’utilisation m... 2 en introduction safety instructions fcc warning this equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equi... 3 en introduction en caution: danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Warning: batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. Laser safety this apparatus employs ... 4 en introduction introduction safety instructions ........................................................................2 supplied accessories ...................................................................5 trademark information .................................................................. 5 en introduction en hdmi, the hdmi logo, and high-definition multimedia interface are trademarks or registered trademarks of hdmi licensing llc in the united states and other countries. Manufactured under license from dolby laboratories. Dolby, pro logic, and the double-d symbol are trademarks of d... 6 en introduction blu-ray disc you can enjoy blu-ray disc which is capable of storing five times more data than a conventional dvd. Bd-java with some bds which support java applications, you can enjoy the interactive functions such as games or interactive menus. Full high-definition video playback w... 7 en introduction en (*) the unit can also be turned on by pressing these buttons. 1. Standby/on q button • press to turn on the unit, or to turn the unit into the standby mode. (to completely turn off the unit, you must unplug the ac power cord.) • press and hold for 10 seconds to shut down the uni... 8 en introduction (*) the unit can also be turned on by pressing these buttons. 1. Standby/on q button • press to turn on the unit, or to turn the unit into the standby mode. (to completely turn off the unit, you must unplug the ac power cord.) 2. Display button • press to display the on-screen disp... 9 en introduction en 24. Return button • press to return to the previously displayed menu screen. 25. Ok button • press to confirm or select menu items. 26. Pop menu / menu button bd: • press to display the pop-up menu. Dvd: • press to display the disc menu. 27. Clear button disc: • press to clear t... 10 en introduction 1. Displays repeat icon. (appears during repeat playback.) 2. Displays media mode icon (disc mode or sd card mode). 3. Displays playback status icon. Refer to table a below. 4. Displays source mode status (refer to table b below) or information such as title number, elapsed playin... 11 en en connections make the following connection to ensure an optimum sound experience. 1 place the front left and right speakers at equal distances from the tv and at an angle of approximately 45 degrees from the listening position. 2 place the center speaker above the tv or the main unit so that... 12 en connections (supports up to 1080i resolution.) (supports only 480i resolution.) • connect this unit directly to the tv. If the video cables are connected to a vcr, pictures may be distorted due to the copy right protection system. Hdmi connection better component video in y p b /c b p r /c r b... 13 en connections en component video connection standard video connection you can change the resolution of the video signal being output from the hdmi out jack in the setup menu. For details, refer to “hdmi video resolution” on page 37. Hdmi mode and actual output signals speakers(4 Ω) sub- woofer f... 14 en connections 1 connect the speaker cables to the matching color sockets on the speakers. 2 connect all the speakers and subwoofer to the matching sockets at the rear of the main unit. Make sure that the colors of the cables and sockets are matched. Connecting speakers and subwoofer speakers(4 Ω... 15 en connections en • this unit provides analog and digital audio connection. You can connect the audio output from an audio / video device (e.G. Dvd recorder, vcr, cable / satellite box, game console or tv) to this blu-ray disc home theater in order to enjoy the multi-channel surround sound capabi... 16 en connections connect a 3.5mm stereo audio cable(not supplied) to the mp3 line-in jack on this unit and the headphone jack on your portable media player. 1 connect the supplied fm wire antenna to the fm ant 75 Ω jack on this unit. 2 extend the fm antenna and fix its ends to the wall for optimum ... 17 en connections en after you have completed all the connections, you must find the correct video channel (external input channel) on your tv. Finding the video channel on your tv 1 after you have made all the necessary connections, press [standby/on q] to turn on the unit. 2 turn on your tv. 3 pre... 18 en playback before you start playing back a disc, read the following information. This unit is compatible to play back the following discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs t... 19 en playback en bd-video and dvd-video are recorded in different color systems throughout the world. The most common color system is ntsc (which is used primarily in the united states and canada). This unit employs ntsc color system, so the disc you play back must be recorded in the ntsc system. Y... 20 en playback chapter information title information track / file information disc information file name information : mp3 files : wma files : jpeg file tag information decoding format information current title number current chapter number / total number of chapters current repeat setting (only whe... 21 en playback en to eject the disc: press [open/close a] to open the disc tray. Remove the disc. Press [open/close a] to close the disc tray. You can play back the mp3 / wma / jpeg files in an sd memory card. With the sd memory card, you can also enjoy the special additional contents for bd-rom pro... 22 en playback for the playback media to be read by this unit, the correct media mode should be selected. You can switch the media mode by following the steps below. “media select” is available only when an sd memory card is inserted and this unit is in disc / sd card mode. Selecting the media mode ... 23 en playback en playing back a bd or a dvd 1 press [standby/on q]. 2 turn on the tv and select the appropriate input on the tv to which the unit is connected. 3 insert a disc (refer to “how to insert a disc” on page 21 ). 4 playback may start automatically. If not, press [b (play)]. Some discs may... 24 en playback many of bd-video and dvd-video discs contain title menu (bd-video / dvd-video), disc menu (dvd-video) or pop-up menu (bd-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs. Title menu (bd-video / dvd-video) ... 25 en playback en icons: : folder : audio cd tracks : mp3 files : wma files : jpeg files it is recommended that files to be played back in this unit are recorded under the following specifications: this unit can also run jpeg files stored on kodak picture cd. You can enjoy picture images on the tv s... 26 en playback 1 during playback, press [d (forward)] repeatedly for fast forward. During playback, press [e (reverse)] repeatedly for fast reverse. Every time you press [d (forward)] or [e (reverse)], the playback speed will change. 2 press [b(play)] to return to normal playback. 1 during playback,... 27 en playback en you can play back the disc/card in your desired order. 1 in stop mode, press [mode]. 2 use [k / l] to select a track / folder / file, then press [ok]. • for mp3, wma or jpeg files, use [k / l] to select a folder, then press [ok] first, and then use [k / l] to select a file, then pr... 28 en playback this function shuffles the playback order of tracks / files. 1 in stop mode, press [mode] twice. 2 press [b (play)] to start random playback. To exit from the random playback mode: • press [mode] in stop mode. You can adjust the picture quality. 1 during playback, press [mode] repeate... 29 en playback en some bd-video have the pip function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [mode] whenever the scene contains the secondary video. 1 during playback, press [mode] repeatedly until the pip function appea... 30 en playback 1 during playback, press [g (skip)] to move to the next track / title / chapter / file. Press it repeatedly to skip to subsequent tracks. Press [h (skip)] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. • for jpeg files, press [... 31 en playback en you can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Some video materials may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the... 32 en playback there are 2 options for the “bd audio mode” setting; either by setting the output to the secondary and interactive audio accompanied by the primary audio or by setting only the primary audio. Depending on the setting of the mode, dolby digital, dolby digital plus, dolby truehd, dts, o... 33 en playback en you can control the volume level of the audio output from 5.1ch speakers. To increase or decrease the volume level : press [vol. + / –]. • the volume level will increase or decrease, every time you press [vol. +] or [vol. –]. • the volume level will be displayed on the front panel ... 34 en playback you can change the active source mode to the desired external audio inputs and enjoy audio from the connected device with the multi-channel surround sound capabilities. 1 press [source ⴐ / ⴑ] . • “input select” screen will appear. 2 use [k / l] to select the desired source mode, then ... 35 en playback en by connecting the supplied fm wire antenna, you can listen to fm radio on this unit. When you access radio mode for the first time, follow the instruction to store a radio station to your preset station list. You can store up to 40 fm radio stations in the memory. 1 connect the sup... 36 en function setup in the setup menu screen, you can access various kinds of menus, and customize them as you prefer. To call up the setup menu screen, press [setup]. Then follow the instructions below to navigate through the screen. • use [k / l] to move the highlight up and down. • press [ok] to... 37 en function setup en category menus / options description custom language player menu* auto (xxx) sets the language for player menu. (on-screen display menu) “auto”: activates the get & set menu language function (refer to page 44). • “auto” is available only when “fun- link(hdmi cec)” is set to ... 38 en function setup category menus / options description cust om video still mode auto adjusts picture resolution and quality in still mode. “auto”: automatically selects the best resolution setting (“frame” or “field”) based on the data characteristics of the pictures. “field”: stabilizes the pict... 39 en function setup en category menus / options description custom audio bd audio mode mix audio output for bd, selects whether to output the secondary and interactive audio with primary audio if it is available or only the primary audio. Refer to “setting the bd audio mode” on page 32. “mix audio ... 40 en function setup category menus / options description custom audio speaker setup • this feature is available only when “audio output” is set to “speakers”. (refer to page 42.) delay time • this is a parameter for optimizing the timing at which the sound outputs from the speakers according to the... 41 en function setup en category menus / options description initialize setup no • refer to page 45 for more information. Resets all the settings, except for “parental” to the factory default. Yes format sd card no re-formats sd card. Yes erase saved bd-rom data (player) no re-formats local storage ... 42 en function setup use this feature to adjust the aspect ratio of the video source which is different from your tv’s ratio to fit your tv monitor without distorting the picture. Descriptions of each setting are as follows: if you set to “speakers” : the audio output from the 5.1ch speakers differs... 43 en function setup en *1 ) only the independent substream is decoded. *2 ) only the dolby digital substream is decoded. *3 ) only the core substream is decoded. • when playing back a bd-video which only contains the primary audio, the audio output will be the same case as the “hd audio output” eve... 44 en function setup some bd-videos or dvd-videos feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will play back. This feature prevents your children from viewing inappropriate material. 1 use [k / l]... 45 en function setup en you can confirm the current software version. 1 in stop mode, press [setup]. 2 use [k / l] to select , then press [ok]. 3 use [k / l] to select , then press [ok]. 4 use [k / l] to select “software update”, then press [ok]. 5 use [k / l] to select “current version”, then press... 46 en others if the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Troubleshooting problem solution no power - check if the ac cord is properly connected. - unplug the ac cord once, and wait for 5-10 seconds and then plu... 47 en others en analog audio an electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “digital audio”. Aspect ratio the width of a tv screen relative to its height. Conventional tvs are ... 48 en others dolby digital the system to compress digital sound developed by dolby laboratories. It offers you sound of stereo (2ch) or multi- channel audio. Dolby digital plus dolby digital plus is the next generation digital audio compression technology developed as an extension to dolby digital. ... 49 en others en language code list language code a-b abkhazian 4748 afar 4747 afrikaans 4752 albanian 6563 amharic 4759 arabic 4764 armenian 5471 assamese 4765 aymara 4771 azerbaijani 4772 bashkir 4847 basque 5167 bengali;bangla 4860 bhutani 5072 bihari 4854 bislama 4855 breton 4864 bulgarian [bul] ... 50 en others specifications general signal system ntsc color power requirements 120 v ac, 60 hz power consumption 70 w (standby: 0.6 w) total output power (amplifier) home theater mode: 1000 w ftc* output power : 700 w *(main ch @ 1 khz within 10% thd, sub ch 60 hz within 2.5% thd) dimensions (width... 51 en others en servicing • please refer to relevant topics on “troubleshooting” on page 46 before returning the product. • if this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn the unit to the standby mode, unplug the power... E1s12ud 1vmn29933 ((((( limited warranty funai corp. Will repair this product, free of charge in the usa in the event of defect in materials or workmanship as follows: duration: parts: funai corp. Will provide parts to replace defective parts without charge for one (1) year from the date of original...
Front Panel Display
Summary of Magnavox MRD410B/F7
Page 1
Page 2: Introduction
Page 3: Introduction
Page 4: Introduction
Page 5: Introduction
Page 6: Introduction
Page 7: Introduction
Page 8: Introduction
Page 9: Introduction
Page 10: Introduction
Page 11: Connections
Page 12: Connections
Page 13: Connections
Page 14: Connections
Page 15: Connections
Page 16: Connections
Page 17: Connections
Page 18: Playback
Page 19: Playback
Page 20: Playback
Page 21: Playback
Page 22: Playback
Page 23: Playback
Page 24: Playback
Page 25: Playback
Page 26: Playback
Page 27: Playback
Page 28: Playback
Page 29: Playback
Page 30: Playback
Page 31: Playback
Page 32: Playback
Page 33: Playback
Page 34: Playback
Page 35: Playback
Page 36: Function Setup
Page 37: Function Setup
Page 38: Function Setup
Page 39: Function Setup
Page 40: Function Setup
Page 41: Function Setup
Page 42: Function Setup
Page 43: Function Setup
Page 44: Function Setup
Page 45: Function Setup
Page 46: Others
Page 47: Others
Page 48: Others
Page 49: Others
Page 50: Others
Page 51: Others
Page 52: Limited Warranty