- DL manuals
- Magnavox
- TV VCR Combo
- MGTD204
- Owner's Manual
Magnavox MGTD204 Owner's Manual - page 62
- 10Â -
FR
1C29
46
48
47
ANT.
AUDIO OUT
COAXIAL
20.
Prises dâentrĂ©e AUDIO L/R (son G/D)
Pour brancher aux prises de sortie de son dâune
camĂ©ra vidĂ©o ou dâun magnĂ©toscope.
21.
Logement de la vidéocassette
22.
Touche PICTURE (image)
Appuyez pour rĂ©gler lâimage.
23.
Touches numériques
Mode TV/VCR:
[P.18]
Tapez deux chiffres pour accéder directement à la
chaßne désirée.
Rappelez-vous dâappuyer sur â0â devant les numĂ©ros
de chaĂźne Ă un seul chiffre.
Touche +100
Appuyez pour sélectionner les chaßnes cùblées ayant
un nombre égal ou supérieur à 100.
Mode DVD:
Appuyez pour saisir le numéro voulu.
Touche +10
Appuyez pour sélectionner les numéros égaux ou
supérieurs à 10.
24.
Touche PAUSEÂ
[TV/VCR P.26 / DVD P.38]
Interrompt la marche du disque ou de la cassette en
cours.
25.
Touche SPEED (vitesse)Â
[TV/VCR P.30]
Appuyez pour choisir la vitesse dâenregistrement
désirée:SP/SLP
26.
Touche C.RESET (remise Ă zĂ©ro)Â
[TV/VCR P.28]
Appuyez pour remettre le compteur Ă 00:00:00.
Appuyez pour annuler la configuration dâunÂ
programme avec minuterie. (Voir page 33.)
27.
Touche DISPLAY (affichage)
Mode TV/VCR:
Affiche le compteur ou le numéro de la chaßne en
cours et le temps actuel sur lâĂ©cran de TĂLĂ.
Mode DVD:
[P.43]
Affiche lâĂ©tat rĂ©el sur lâĂ©cran de tĂ©lĂ© pour effectuer
les contrĂŽles.
28.
Touche SETUP (configuration)Â
[TV/VCR P.15 / DVD P.44-46]
Appuyez pour entrer ou sortir du menu de la TĂLĂ
ou du mode de configuration du DVD.
29.
Touche TITLEÂ Â (titre)Â
[DVD P.37]
Affiche le menu des titres.
30.
Touche CLEAR (effacer)
Remet à zéro une configuration.
31.
Touche MODEÂ
[DVD P.40]
Active le mode lecture programmée ou la lecture aléatoire.
32.
Touche SEARCH MODE (mode recherche)Â
[DVD P.39]
Appuyez pour repérer un endroit désiré.
33.
Touche AUDIO (son)
[DVD P.42]
Appuyez pour sélectionner la langue son ou le mode
son désiré.
34.
Touche SUBTITLE (sous-titre)
[DVD P.42]
Appuyez pour sélectionner la langue désirée pour le
sous-titrage.
35.
Touche REPEAT (répéter)
[DVD P.42]
RĂ©pĂšte la lecture du disque, du titre, du chapitre, du
groupe ou de la piste en cours.
36.
Touche ANGLE (mode DVD)
[DVD P.42]
Appuyez pour modifier lâangle de la camĂ©ra et voir
la sĂ©quence Ă partir dâun autre angle (si disponible).
37.
Touche A-B REPEAT (répéter A-B)
[DVD P.40]
RĂ©pĂšte la lecture dâune partie sĂ©lectionnĂ©e.
38.
Touche RETURN (retour)
Revient Ă lâopĂ©ration prĂ©cĂ©dente dans le mode de
configuration TV/VCR et mode de configuration
DVD.
39.
Touche ENTER (validation)
Appuyez pour accepter une configuration.
40.
Touches directionnellesÂ
Mode TV/VCR:
Appuyez pour sélectionner un mode de configuration
sur le menu affichĂ© sur lâĂ©cran de tĂ©lĂ©.
Appuyez pour effectuer une sélection ou un réglage
Ă partir dâun menu particulier.
Mode DVD:
Pour effectuer les réglages tout en regardant
lâaffichage sur lâĂ©cran de tĂ©lĂ©.
41.
Touche DISC MENU (menu du disque)Â
[DVD P.37]
Affiche les menus dans le DVD.
42.
Touche V.SURR (quadriphonie virtuelle)Â
[DVD P.42]
Appuyez dessus pour activer/désactiver la
quadriphonie virtuelle.
43.
Touche MUTE (sourdine) Coupe le son
Appuyez de nouveau pour réactiver le son.
44.
Touche SLEEP (sommeil)
[TV/VCR P.34]
Active la minuterie de veille.
45.
Touche SELECT (sĂ©lection)Â
Appuyez pour passer au mode TV/VCR et DVD.
Vous pouvez voir le mode (TV/VCR et DVD) sur
lâindicateur du panneau de commande.
- PANNEAU ARRIĂRE DE LâAPPAREIL - [Fig.3]
Summary of MGTD204
Page 1
Color tv/vcr/dvd triple combo mgtd204 (20 inch) ownerâs manual as an e nergy s tar partner, our company has determined that this product meets the e nergy s tar guidelines for energy efficiency. E nergy s tar is a u.S. Registered mark. Âź Âź Âź if you need additional operating assistance after reading ...
Page 2: Important Safeguards
1.Read instructions-all the safety and operating instructions should be read before the appliance is operated. 2.Retain instructions-the safety and operating instructions should be retained for future reference. 3.Heed warnings-all warnings on the appliance and in the operating instructions should b...
Page 3
- 3 - en 1b15 13.Outdoor antenna grounding-if an outside antenna or cable system is connected to the tv/vcr/dvd, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the national electrical code, ansi/nfpa...
Page 4: Precautions
- 4 - en 1b15 radio-tv interference this equipment has been tested and found to com- ply with the limits for a class b digital device, pur- suant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This e...
Page 5: Avoid The Hazards of
- 5 - en 1c29 avoid the hazards of electrical shock and fire location for safe operation and satisfactory performance of your tv/vcr/dvd, keep the following in mind when selecting a place for its installation: âą shield it from direct sunlight and keep it away from sources of intense heat. âą avoid du...
Page 6: Table Of Contents
- 6 - en 1c29 table of contents c important safeguards . . . . .2 c precautions . . . . . . . . . . . . . . . .4 location . . . . . . . . . . . . . . . . . . .5 avoid the hazards of electrical shock and fire .5 warning . . . . . . . . . . . . . . . . . . . .5 symbols used in this manual . . . . . . ...
Page 7: Features
- 7 - en 1c29 âą hi-fi systemâ the hi-fi stereo recording system offers you excellent sound quality with a dynamic range of 80db, frequency response from 20hz to 20khz and 0.005% wow and flutter. âą rotary 4-head record/playback systemâ four heads ensure excellent picture quality and special effects p...
Page 8
- 8 - en 1c29 ÂĄ dolby digital sound this tv/vcr/dvd can handle dolby digital sur- round sound having 5.1 channels when connected to a dolby digital decoder . ÂĄ still/fast/slow/step playback various playback modes are available including still pictures, fast forward/reverse, slow motion and step fram...
Page 9
- 9 - en 1c29 operating controls and functions 5. Stop button [tv/vcr p.26 / dvd p.37] stops operation of the disc. (or front panel) stops operation of the disc or tape contents. (remote control) 6. Open/close button [dvd p.37] press to insert discs into or remove them from the tray. 7. Disc loading...
Page 10
- 10 - en 1c29 46 48 47 ant. Audio out coaxial 20. Audio l/r input jacks connect to the audio output jacks of a video camera or vcr. 21. Cassette compartment 22. Picture button press to adjust the picture. 23. Number buttons tv/vcr mode: [p.18] press two digits to directly access the desired channel...
Page 11: Preparation For Use
- 11 - en 1c29 cable with converter/ descrambler box or satellite box if your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration. By using this connection you can also record scram- bled channels. However, chan...
Page 12: Installing The Batteries
- 12 - en 1c29 to record a scrambled/unscram- bled channel 1. Set the tv/vcr/dvd channel selector to the out- put channel of the cable converter box or satellite box. (ex. Ch3) 2.Select the channel to record from your cable converter box or satellite box. Installing the batteries 1)open the battery ...
Page 13
- 13 - en 1c29 connecting to a stereo amplifier equipped with digi- tal input jacks such as md deck or dat deck (for dvd) use an audio coaxial digital cable available at retail for the audio connections. Connecting to an amplifier equipped with digital input jacks such as md deck or dat deck. Notes:...
Page 14
- 14 - en 1c29 ant. Audio out coaxial front speaker (left) center speaker front speaker (right) surround speaker (left) surround speaker (right) subwoofer to digital audio out coaxial jack to coaxial digital audio input jack dolby digital decoder [fig. 7] connecting to a dolby digital decoder (for d...
Page 15: Set Up For Use
1 plug in the tv/vcr/dvd power cord plug the tv/vcr/dvd power cord into a standard ac outlet. Note: âą if any digits appear in the corner of the screen, press the power button without unplug- ging the power cord. Make sure ... âą press the source or select button to select tv/ vcr mode or make sure tv...
Page 16
- 16 - en 1c29 5 select the year press the arrow button k or l until your desired year appears. (example: 2004) then press the arrow button b. 6 select the hour press the arrow button k or l until your desired hour appears. (example: 5, pm) then press the arrow button b. 7 select the minute press th...
Page 17: Daylight-Saving Time
- 17 - en 1c29 daylight-saving time select this feature and the tv/vcr/dvdâs clock automatically will advance one hour in april, then reverse one hour in october. When daylight-saving time is on, the clock will change automatically as follows: âą first sunday of april : at 2 am the clock imme- diatel...
Page 18: Channel Set Up
- 18 - en 1c29 channel set up make sure ... âą press the power button to turn on the tv/vcr/dvd. 1 select âchannel set upâ press the setup button on the remote control. Press the arrow button k or l to point to âchannel set upâ. Then press the enter button. 2 begin auto ch programming press the arrow...
Page 19: Tv Operation
- 19 - en 1c29 tv operation degaussing magnetism from nearby appliances and speakers might affect the color of the tv picture. If this happens, move this tv/vcr/dvd away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes later or so. Tv/vcr...
Page 20: Closed Caption System
- 20 - en 1c29 closed caption system you can view specially labeled (cc) tv programs, movies, news and pre-recorded tapes with either a dialogue caption or text display. Caption mode: by choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents ...
Page 21: V-Chip Set Up
- 21 - en 1c29 5 exit the v-chip setting mode press the setup button on the remote control to exit the screen. V-chip set up make sure ... âą tv/vcr/dvd is turned on. 1 select âv-chip set upâ press the setup button on the remote control. Press the arrow button k or l to select âv-chip set upâ. Then p...
Page 22
- 22 - en 1c29 changing v-chip blocked pro- gramming note: to change the rating, the tv must be turned to a station that is not protected. If the (protected) appears on the screen, please change the channel to a station that is not protected. 1)follow steps [1] to [2]. 2)press the arrow button k or ...
Page 23: Mts Recording/monitor Mode
- 23 - en 1c29 mts (multi-channel television sound) system you can record or listen to a program in mts stereo. Checking the selected mts mode when you play a vhs tape, or receive a broadcast on the tv/vcr/dvd tuner channel you are watching, the status shown below will appear when you press the disp...
Page 24: Selecting The Mts System
- 24 - en 1c29 selecting the mts system make sure ... âą tv/vcr/dvd power must be turned on. To select hifi mode 1 select âuserâs set upâ press the setup button on the remote control. Press the arrow button k or l to point to âuserâs set upâ. Then press the enter button. 2 select âvcr audioâ press th...
Page 25: Video Cassette
- 25 - en 1c29 video cassette this tv/vcr/dvd will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. Removing a cassette 1)in the stop mode, press the stop/eject button on the tv/vcr/dvd. The cassette ...
Page 26: Playback
- 26 - en 1c29 playback normal playback make sure ... âą tv/vcr/dvd power must be turned on. 1 insert a prerecorded tape if the erase-protection tab has been removed, the tv/vcr/dvd will start playback automatically. 2 to begin playback press the play button. 3 to stop playback press the stop button ...
Page 27: Special Playback
- 27 - en 1c29 special playback this function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 select âuserâs set upâ press the setup button on the remote control. Press the arrow button k or l to point to âuserâs set upâ. Then press the enter butto...
Page 28: Search
- 28 - en 1c29 search make sure ... âą tv/vcr/dvd power must be turned on. âą insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. Note: zero return will not work on a blank tape or a blank portion of a tape. 1 stop a tape ...
Page 29: Index Search
- 29 - en 1c29 index search this feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. âą the index mark will be made automatically when the record button is pressed. It will also be marked at the starting point of timer...
Page 30: Recording
- 30 - en 1c29 recording make sure ... âą tv/vcr/dvd power must be turned on. âą insert a cassette tape with its erase prevention tab in place. (if necessary, rewind or fast forward the tape to the point at which you want to begin recording.) notes: âą this tv/vcr/dvd will only record and view the same...
Page 31: Otr (One Touch Recording)
- 31 - en 1c29 âą please note that in the slp mode maximum record- ing time, assuming the tape is started at the begin- ning, is 8 hours using t-160 (or 6 hours using t-120). âą if the tape runs out before the end time, the tv/vcr/dvd will switch to the stop mode immediately, ejects the tape and turns...
Page 32: Timer
- 32 - en 1c29 timer you may set the tv/vcr/dvd to start and end a recording while you are away. You can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: date: july 4th, 2004 setting time: from 7:30pm to 8:50...
Page 33: Timer Program Extension
- 33 - en 1c29 to shift the time schedule of an automatic timer recording. 1)press the power button. 2)repeat step [1] on page 32. 3)press the record button and select the desired program using the arrow button k or l. 4)press the record button again. Each additional push will shift forward the begi...
Page 34: Hints For Automatic
- 34 - en 1c29 to check the begin/end time 1)press the power button so that the recording indicator goes off. 2)press the setup button on the remote control. 3)confirm âtimer programmingâ is pointed. 4)press the enter button. The details of programs appear on the tv screen. 5)press the setup button ...
Page 35: On Screen Display
- 35 - en 1c29 on screen display to check the counter, clock and channel number on the tv screen, press the display button on the remote control. Each time you press the display button on the remote control, the tv screen will change as follows: when the closed caption mode is off: âą counter mode: a...
Page 36: Dvd Section
â 36 â en 01a11 dvd section about the discs disc types the following discs can be played back on this tv/vcr/dvd. ÂĄ dvd video ÂĄ dvd-r/rw* ÂĄ dvd+r/rw* ÂĄ audio cd ÂĄ cd-r/rw* ÂĄ mp3* * depending on the types or the writing method of the medium some discs can not be played. âą some dvd-r/rw, dvd+r/rw or c...
Page 37: Playing AÂ Disc
â 37 â en 01a11 playing a disc basic playback getting started ÂĄ turn on the power of amplifier and any other com- ponents, if necessary. 1 press the power button. ÂĄ the power will turn on. 2 press the open/close button to open disc loading tray. 3 place the chosen disc in the tray, with the label fa...
Page 38: Step By Step Playback
â 38 â en 01a11 step by step playback 1 during playback, press the pause button. ÂĄ playback will pause and sound will be muted. 2 the disc goes forward by one frame each time the pause button is pressed. 3 to exit step by step playback, press the play button. Dvd-v resume 1 during playback, press th...
Page 39: Search Function
â 39 â en 01a11 search function track search there are three ways to begin playback on an audio cd and mp3 at a specific track. Using the number buttons on the remote control 1 press the number buttons to enter the desired track number. ÂĄ playback will start at the selected track. ÂĄ for single digit...
Page 40: Special Playback Function
â 40 â en 01a11 special playback function repeat repeat title / chapter to activate the repeat function press the repeat button during playback. ÂĄ the repeat mode changes as described below every time you press the button. Dvd-v repeat is available only during playback. Chapter title off (current ch...
Page 41: Playing AÂ Mp3Â Disc
â 41 â en 01a11 playing a mp3 disc when a cd with mp3 files is in the tv/vcr/dvd, press the disc menu button to call up the mp3 menu on the tv screen. 1 in stop mode, press the arrow button ( k / l ) to select the desired group or track. ÂĄ if a group is selected press the arrow button b or the enter...
Page 42: Changing The Settings
â 42 â en 01a11 changing the settings audio language the tv/vcr/dvd allows you to select a language during dvd disc (if multi languages are available) playback. 1 press the audio button during playback. 2 press the audio button repeatedly to select your desired language. Note ÂĄ pressing the audio bu...
Page 43: The On-Screen Information
â 43 â en 01a11 for dvd-vs 1 press the display button during playback to show current chapter. ÂĄ the elapsed and remaining playing time of the current chapter will be displayed. 2 press the display button again to show current title. ÂĄ the elapsed and remaining playing time of the cur- rent title wi...
Page 44: Language Setting
â 44 â en 01a11 changing the dvd setup items language setting language options are not available with some discs. 1 press the setup button twice in stop mode so that the dvd setup menu appears. ÂĄ if the menu does not appear, press the play button and the stop button then the setup button twice. 2 pr...
Page 45: Audio Settings
â 45 â en 01a11 audio settings choose the appropriate audio settings for your equip- ment as it only affects during the playback of dvd discs. 1 press the setup button twice in stop mode so that the dvd setup menu appears. ÂĄ if the menu does not appear, press the play button and the stop button then...
Page 46: Parental Control
â 46 â en 01a11 â 46 â control levels ÂĄall all parental lock is cancelled. ÂĄlevel 8 dvd software of any grade (adult/general/children) can be played back. ÂĄlevels 7 to 2 only dvd software intended for general use and children can be played back. ÂĄlevel 1 only dvd software intended for children can b...
Page 47: Troubleshooting Guide
â 47 â en 01a11 sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money. Tv/vcr mode troubleshooting guide problem corrective action no picture and sound...
Page 48
â 48 â en 01a11 closed caption problem possible remedy my tv/vcr/dvd is showing âą you are watching a live broadcast and spelling errors made by the captions that are misspelled. âą closed captioning production company may pass through uncorrected. âą a prerecorded program will not show any misspelled ...
Page 49
â 49 â en 01a11 notes: âą some functions are not available in specific modes, but this is not a malfunction. Read the description in this ownerâs manual for details on correct operations. âą playback from a desired track and random playback are not available during program playback. Problem corrective...
Page 50: Disc Handling
â 50 â en 01a11 en 01a11 cabinet cleaning âą wipe the front panel and other exterior surfaces of the tv/vcr/dvd with a soft cloth immersed in lukewarm water and wrung dry. âą never use a solvent or alcohol. Do not spray insec- ticide liquid near the tv/vcr/dvd. Such chemi- cals may cause damage and di...
Page 51: Specifications
â 51 â en 01a11 crt 20 inch in-line gun, 90Ë deflection tube television system : ntsc-m closed caption system :§15.119/fcc video heads : rotary four-head tape width : 1/2 inch tape speed sp : 33.40mm/sec. Lp : 16.67mm/sec. Slp : 11.12mm/sec. Tuner channel tv vhf low : #2~#6 tv vhf high : #7~#13 tv u...
Page 52
Printed in malaysia 1emn20110 t1059ck â â â â â limited warranty funai corp. Will repair this product, free of charge in canada in the event of defect in materials or workmanship as follows: duration: parts: funai corp. Will provide parts to replace defective parts without charge for one (1) year from t...
Page 53: Mgtd204
Ensemble tĂlĂviseur/magnĂtoscope/lecteur dvd mgtd204 (20 pouces) guide dâutilisation en tant que partenaire de energy star notre sociĂ©tĂ© a conclu que ce produit rĂ©pond aux normes d'Ă©conomie Ă©nergĂ©tique de energy star. Energy star est une marque dĂ©posĂ©e aux Ătats unis. Âź Âź Âź accessoires inclus avec l...
Page 54
1.Lisez les instructions-veuillez lire toutes les instructions relatives Ă la sĂ©curitĂ© et au fonctionnement avant dâutiliser lâappareil. 2.Conservez les instructions-les instructions sur la sĂ©curitĂ© et le fonctionnement doivent ĂȘtre conservĂ©es pour consultation ultĂ©rieure. 3.Respectez les avertissem...
Page 55
- 3 - fr 1b15 13.Mise Ă la terre de lâantenne extĂ©rieure-si une antenne extĂ©rieure ou un rĂ©seau cĂąblĂ© est connectĂ© sur lâappareil, vĂ©rifiez si lâantenne ou le rĂ©seau cĂąblĂ© est mis Ă la terre afin de protĂ©ger contre les poussĂ©es momentanĂ©es de tension et lâaccumulation de charges Ă©lectrostatiques. Lâ...
Page 56: Précautions
- 4 - fr 1b15 interfĂrences tĂlĂ-radio cet appapreil a Ă©tĂ© essayĂ© et dĂ©clarĂ© conforme aux prescriptions sur les dispositifs numĂ©riques de classe b, conformĂ©ment Ă la partie 15 du rĂšglement de la fcc. Ces prescriptions ont pour but de protĂ©ger correctement les installations domestiques contre les int...
Page 57: Pour Ăviter Les Risques
- 5 - fr 1c29 pour Ăviter les risques dâĂlectrocution et dâincendie emplacement pour que votre appareil fonctionne de façon satisfaisante et sĂ»re, rappelez-vous ce qui suit lorsque vous choisissez oĂč lâinstaller: âą protĂ©gez-le de la lumiĂšre solaire directe et Ă©loignez-le des sources de chaleur inten...
Page 58: Table Des MatiĂšres
- 6 - fr 1c29 table des matiĂres c mesures de sĂcuritĂ importantes . . . . . . . . . . . . . . . . .2 c prĂcautions . . . . . . . . . . . . . . . .4 emplacement . . . . . . . . . . . . . . .5 pour Ăviter les risques dâĂlectrocution et dâincendie . . . . . . . . . . . . . . . . . . .5 avertissement ....
Page 59: Caractéristiques
- 7 - fr 1c29 âą systĂšme hi-fiâ le systĂšme dâenregistrement hi-fi stĂ©rĂ©o offre une excellente qualitĂ© sonore avec une etendue dynamique de 80db, une frĂ©quence de rĂ©ponse de 20hz Ă 20khz et une fluctuation de 0,005%. âą systĂšme rotatif dâenregistrement/de lecture Ă quatre tĂȘtesâ quatre tĂȘtes assurent u...
Page 60
- 8 - fr 1c29 ÂĄ dolby digital ce lecteur supporte le dolby digital ayant 5.1 canaux lorsquâil est branchĂ© sur un dĂ©codeur dolby digital. ÂĄ lecture fixe/rapide/ralenti/pas Ă pas plusieurs modes de lecture sont disponibles y compris images fixes, avant/arriĂšre rapide, ralenti et pas Ă pas. ÂĄ lecture a...
Page 61: Commandes Et Fonctions
- 9 - fr 1c29 6. Touche open/close (ouvrir/fermer) [dvd p.37] appuyez pour insérer les disques sur le plateau ou les retirer. 7. Plateau 8. Indicateur dvd voyant allumé lors du mode dvd. 9. Touche source appuyez pour passer au mode tv/vcr, au mode entrée extérieure ou au mode dvd. 10. Indicateur tv/...
Page 62
- 10 - fr 1c29 46 48 47 ant. Audio out coaxial 20. Prises dâentrĂ©e audio l/r (son g/d) pour brancher aux prises de sortie de son dâune camĂ©ra vidĂ©o ou dâun magnĂ©toscope. 21. Logement de la vidĂ©ocassette 22. Touche picture (image) appuyez pour rĂ©gler lâimage. 23. Touches numĂ©riques mode tv/vcr: [p.18...
Page 63: PrĂ©paration Ă LâUsage
- 11 - fr 1c29 cble avec convertisseur/ dĂsembrouilleurou boĂtier satellite si votre cĂąblo-diffuseur vous fournit un convertisseur ou si vous utilisez un systĂšme par satellite, vous pouvez utiliser la connexion de base montrĂ©e dans lâillustration. En utilisant cette connexion vous pouvez aussi enreg...
Page 64: Mise En Place Des Piles
- 12 - fr 1c29 pour enregistrer une chaĂne brouillĂe/dĂsembrouillĂe 1. Configurez le sĂ©lecteur de chaĂźnes sur la chaĂźne de sortie du convertisseur du rĂ©seau cĂąblĂ© ou sur le boĂźtier satellite. (exemple. Ch3) 2.SĂ©lectionnez la chaĂźne que vous voulez enregistrer Ă partir du convertisseur du rĂ©seau cĂąbl...
Page 65: (Uniquement Pour Le Dvd).
- 13 - fr 1c29 connexion sur un amplificateur stĂrĂo ĂquipĂ de prises dâentrĂe numĂriques, lecteur md platine Ă cassette dat (uniquement pour le dvd). Utilisez les cĂąbles son numĂ©riques coaxiaux en vente dans le commerce pour les connexions son. Connexion sur un amplificateur stĂ©rĂ©o Ă©quipĂ© de jacks ...
Page 66
- 14 - fr 1c29 ant. Audio out coaxial haut-parleur avant (gauche) haut-parleur central haut-parleur avant (droit) haut-parleur quadriphonique (gauche) haut-parleur quadriphonique (droit) haut-parleur dâextrĂȘme grave sur la prise dâentrĂ©e son numĂ©rique coaxial (coaxial) (pcm/bitstream) sur la prise d...
Page 67: Section Tv/vcr
- 15 - fr 1c29 programmation de lâappareil section tv/vcr 1 branchement du cordon dâalimentation du lâappareil branchez le cordon dâalimentation du lâappareil sur une prise de courant alternatif conventionnelle. Remarque : âą si des chiffres apparaissent dans le coin de lâĂ©cran, appuyez sur la touche...
Page 68
- 16 - fr 1c29 4 sĂ©lectionner le jour. Appuyez sur la touche directionnelle k ou l jusquâĂ ce que le jour souhaitĂ© apparaisse. (exemple: 6 â 06). Puis, appuyer sur la touche directionnelle b. 5 sĂ©lectionner lâannĂ©e. Appuyez sur la touche directionnelle k ou l jusquâĂ ce que lâannĂ©e souhaitĂ©e apparai...
Page 69
- 17 - fr 1c29 3 commencez ârech. Auto horloge ch.â appuyez sur la touche directionnelle l pour sĂ©lectionner ârech. Auto horloge ch.â. Appuyez sur la touche enter. âą lâappareil recherche maintenant la station contenant le signal de rĂ©glage dâhorloge automatique. La recherche du signal peut demander ...
Page 70
- 18 - fr 1c29 Ă ce stade-ci, nous vous recommandons de programmer tous les canaux que vous ĂȘtes en mesure de capter dans votre rĂ©gion. Remarque: la programmation du syntonisateur de cet appareil nâest pas nĂ©cessaire lorsque vous utilisez un convertisseur/dĂ©codeur du cĂąble ou de lâantenne paraboliqu...
Page 71
Fonctionnement du tĂlĂviseur - 19 - fr 1c29 canaux ajoutĂ©s: bleu clair canaux supprimĂ©s: rouge clair 4 effacement (ou ajout) de la mĂ©moire appuyez sur la touche enter afin dâeffacer (ou ajouter) le canal sĂ©lectionnĂ©. Vous verrez le numĂ©ro du canal effacĂ© passer au rouge Ă lâĂ©cran. Cela confirme son ...
Page 72
- 20 - fr 1c29 3 ajustement des aspects de lâimage ajustez chaque aspect de lâimage en utilisant les touches directionnelle s ou b. S b luminositĂ diminue augmente contraste diminue augmente couleur plus pĂąle plus vive teinte plus rouge plus vert nettetĂ plus floue plus claire âą si une interruption ...
Page 73: Réglage Circuit V
- 21 - fr 1c29 5 quittez le mode de rĂ©glage de la circuit v appuyez sur la touche setup de la tĂ©lĂ©commande pour quitter lâĂ©cran. RĂglage circuit v vĂ©rifiez que ... âą lâappareil soit allumĂ©. 1 sĂ©lectionnez ârĂglage circuit vâ appuyez sur la touche setup de la tĂ©lĂ©commande. Appuyez sur la touche direc...
Page 74
- 22 - fr 1c29 changement de la programmation barrĂe du circuit v remarque : pour changer la cote, la tĂ©lĂ© doit afficher une station qui nâest pas protĂ©gĂ©e. Si (protĂgĂe) sâaffiche Ă lâĂ©cran, veuillez changer la chaĂźne pour une station qui nâest pas protĂ©gĂ©e. 1)suivez les Ă©tapes [1] Ă [2]. 2)appuyez...
Page 75
- 23 - fr 1c29 systĂme mts (systĂšme multivoies) vous pouvez enregistrer ou Ă©couter un programme en stĂ©rĂ©o mts vĂrification du mode mts sĂlectionnĂ quand vous faites jouer une vidĂ©ocassette vhs ou recevez une Ă©mission sur le rĂ©cepteur de lâappareil de tĂ©lĂ©viseur/magnĂ©toscope/dvd, lâĂ©tat prĂ©sentĂ© ci- ...
Page 76: SĂ©lection Du SystĂšme Mts
- 24 - fr 1c29 sĂlection du systĂme mts vĂ©rifiez que ... âą lâappareil est sous tension. Pour sĂlectionner le mode hifi 1 sĂ©lectionnez ârĂglages de lâusagerâ appuyez sur la touche setup de la tĂ©lĂ©commande. Appuyez sur la touche directionnelle k ou l pour pointer sur ârĂglages de lâusagerâ. Appuyez en...
Page 77: Vidéocassette
- 25 - fr 1c29 vidĂocassette cet appareil fonctionne avec toute vidĂ©ocassette qui possĂšde la marque . Pour obtenir les meilleurs rĂ©sultats, nous recommandons dâutiliser des cassettes de qualitĂ© supĂ©rieure. Nâutilisez pas des cassettes endommagĂ©es ou de mauvaise qualitĂ©. Retrait dâune vidĂocassette 1...
Page 78: Lecture
- 26 - fr 1c29 lecture lecture normale vĂ©rifiez que ... âą lâappareil est sous tension. 1 insĂ©rez une vidĂ©ocassette comportant un enregistrement. Si la languette de protection contre lâeffacement a Ă©tĂ© retirĂ©e, lâappareil commencera automatiquement la lecture. 2 pour commencer la lecture appuyez sur ...
Page 79: Lecture Spéciale
Cette fonction permet dâamĂ©liorer la qualitĂ© de lâimage quand vous faites jouer des vidĂ©ocassettes usĂ©es comme les vidĂ©ocassettes de location. 1 sĂ©lectionnez ârĂglages de lâusagerâ appuyez sur la touche setup de la tĂ©lĂ©commande. Appuyez sur la touche directionnelle k ou l pour pointer sur ârĂglages ...
Page 80: Avant/arriĂšre
- 28 - fr 1c29 avant/arriĂre la fonction de recherche chronomĂ©trique permet dâavancer la cassette Ă la position dĂ©sirĂ©e en indiquant la durĂ©e exacte de lecture que vous dĂ©sirez sauter. Tv/vcr recherche chronomĂtrique remarques: âą la recherche chronomĂ©trique peut ĂȘtre configurĂ©e pour un maximum de 9 ...
Page 81: Recherche Par Indexage
- 29 - fr 1c29 recherche par indexage cette fonction permet dâindexer le point de dĂ©part pour quâil soit facile dây retourner en rembobinant ou en faisant jouer en marche avant rapide. âą la marque dâindexage sâinscrit automatiquement quand vous appuyez sur la touche record. La marque sâinscrit aussi...
Page 82: Enregistrement
- 30 - fr 1c29 enregistrement vĂ©rifiez que ... âą lâappareil est sous tension. âą insĂ©rez une vidĂ©ocassette dont la languette de prĂ©vention dâeffacement est en place. (au besoin, rembobiner ou faites lâavance rapide de la cassette jusquâau point oĂč vous dĂ©sirez commencer lâenregistrement.) remarques: ...
Page 83
Vous pouvez faire des copies des vidéocassettes enregistrées par vos parents et amis pour votre plaisir. Vous ne pouvez pas copier un dvd sur vidéocassettes. Branchez votre appareil et une vcr source (lecture) en suivant le diagramme suivant. 1)insérez la vidéocassette pré-enregistrées dans le vcr s...
Page 84: Minuterie
- 32 - fr 1c29 minuterie vous pouvez configurer lâappareil pour commencer et terminer un enregistrement quand vous ĂȘtes Ă lâextĂ©rieur. Vous pouvez dĂ©finir 8 programmes Ă enregistrer pour des jours particuliers, quotidiennement ou hebdomadairement au cours dâune pĂ©riode de 1 an. Dans lâexemple ci-des...
Page 85
- 33 - fr 1c29 pour dĂ©placer lâhoraire dâun enregistrement automatique avec minuterie. 1)appuyez sur la touche power 2)rĂ©pĂ©tez lâĂ©tape [1] Ă la page 32. 3)appuyez sur la touche record et sĂ©lectionnez le programme dĂ©sirĂ© avec la touche directionnelle k ou l . 4)appuyez de nouveau sur la touche record...
Page 86: Automatique Avec Minuterie
- 34 - fr 1c29 pour vĂrifier lâheure de dĂbut/de fin 1)appuyez sur la touche power pour que lâindicateur recording (enregistrement) sâĂ©teigne. 2)appuyez sur la touche setup de la tĂ©lĂ©commande. 3)confirmez que âprog en diffĂrĂâ est pointĂ©. 4)appuyez sur la touche enter. Les renseignements sur les pro...
Page 87: Affichage Ă LâĂcran
- 35 - fr 1c29 affichage Ă lâĂcran dĂsignations des chaĂnes cblĂes si vous ĂȘtes un souscripteur de la tĂ©lĂ© sur cĂąble, les chaĂźnes sont indiquĂ©es de 1 Ă 125. Les cĂąblo-diffuseurs dĂ©signent souvent les chaĂźnes avec des lettres ou un combinaison de lettres et de nombres. Veuillez consulter votre cĂąblo-...
Page 88: Ă Propos Des Disques
â 36 â fr 01a11 Ă propos des disques cet appareil permet de lire les disques suivants. ÂĄ dvd vidĂ©o ÂĄ dvd-r/rw* ÂĄ dvd+r/rw* ÂĄ audio cd ÂĄ cd-r/rw* ÂĄ mp3* * certains disques ne peuvent pas ĂȘtre lus Ă cause du type et de la mĂ©thode de gravure utilisĂ©s. âą il arrive que certains disques dvd-r/rw, dvd+r/rw...
Page 89: Lecture De Base
â 37 â fr 01a11 lecture de base pour commencer ÂĄ au besoin, allumez lâamplificateur et les autres dis- positifs. 1 appuyez sur la touche power. ÂĄ lâappareil sâallume. 2 appuyez sur la touche open/close pour ouvrir le plateau. 3 placez le disque de votre choix sur le plateau, avec lâĂ©tiquette vers le...
Page 90: Lecture Pas-Ă-Pas
â 38 â fr 01a11 lecture pas-Ă-pas 1 appuyez sur la touche pause pendant la lecture. ÂĄ la lecture sâinterrompt et le son est en sourdine. 2 le disque avance dâune image Ă chaque pression de la touche pause. 3 pour quitter la lecture pas-Ă -pas, appuyez sur la touche play. Dvd-v reprise 1 appuyez sur l...
Page 91: Recherche De Piste
â 39 â fr 01a11 recherche de piste il y a trois maniĂšres de commencer la lecture dâun audio cd et dâun mp3 Ă une piste spĂ©cifique. Ă lâaide des touches numĂ©riques de la tĂ©lĂ©commande 1 appuyez sur les touches numĂ©riques pour saisir le numĂ©ro de la piste voulue. ÂĄ la lecture commence Ă partir de la pi...
Page 92: Répéter
â 40 â fr 01a11 rĂpĂter rĂpĂter le titre / chapitre pour activer la fonction rĂ©pĂ©ter, appuyez sur la touche repeat pendant la lecture. ÂĄ le mode de rĂ©pĂ©tition change de la façon dĂ©crite ci- dessous chaque fois que vous appuyez sur la touche. Dvd-v la fonction repeat nâest disponible que pendant la l...
Page 93: Lecture DâUn Mp3
â 41 â fr 01a11 quand un cĂ©dĂ© avec fichiers mp3 est insĂ©rĂ© dans lâap- pareil, appuyez sur la touche disc menu pour appel- er le menu mp3 sur lâĂ©cran du tĂ©lĂ©viseur. 1 en mode dâarrĂȘt, appuyez sur les touches directionnelles ( k / l ) pour sĂ©lectionner le groupe ou la piste souhaitĂ©e. ÂĄ si un groupe e...
Page 94: Langue Son
â 42 â fr 01a11 langue son lâappareil vous permet de sĂ©lectionner une langue pendant la lecture du dvd (si plusieurs langues sont disponibles). 1 appuyez sur la touche audio pendant la lecture. 2 appuyez plusieurs fois sur la touche audio pour sĂ©lectionner la langue voulue. Remarque ÂĄ la touche audi...
Page 95: Informations Ă LâĂcran
â 43 â fr 01a11 pour les dvd-v 1 appuyez sur la touche display pendant la lecture pour voir le chapitre en cours. ÂĄ le temps Ă©coulĂ© et restant du chapitre en cours sâaffiche. 2 appuyez encore sur la touche display pendant la lecture pour voir le titre en cours. ÂĄ le temps de lecture Ă©coulĂ© et restan...
Page 96: Configuration De La Langue
â 44 â fr 01a11 modification des ĂlĂments de configuration du dvd lâoption langue nâest pas disponible sur certains disques. 1 appuyez deux fois sur la touche setup en mode stop pour faire apparaĂźtre le menu configuration du dvd. ÂĄ si le menu nâapparaĂźt pas, appuyez encore sur la touche play, sur la...
Page 97: RĂ©glages Son
â 45 â fr 01a11 rĂglages son choisissez le rĂ©glage du son adaptĂ© Ă votre appareil parce quâil affecte seulement la lecture de disques dvd. 1 appuyez deux fois sur la touche setup en mode stop pour faire apparaĂźtre le menu configuration du dvd. ÂĄ si le menu nâapparaĂźt pas, appuyez encore sur la touch...
Page 98: ContrĂŽle Parental
â 46 â fr 01a11 â 46 â niveaux de contrĂle ÂĄtout tout le verrouillage parental est effacĂ©. ÂĄniveau 8 tous les disques dvd, de tous les niveaux (adulte/gĂ©nĂ©ral/enfants), peuvent ĂȘtre lus. ÂĄniveaux de 7 Ă 2 seuls les disques dvd dâusage gĂ©nĂ©ral ou pour enfants peuvent ĂȘtre lus. ÂĄniveau 1 seuls les dis...
Page 99
â 47 â fr 01a11 il arrive quâun problĂšme de fonctionnement puisse ĂȘtre facilement rĂ©solu en vĂ©rifiant des possibilitĂ©s qui semblent Ă©videntes, mais sont parfois ignorĂ©es. Avant de faire rĂ©parer, vĂ©rifier les Ă©lĂ©ments suivants. Vous pourriez Ă©pargner du temps et de lâargent. Mode tv/vcr guide de rech...
Page 100
â 48 â fr 01a11 problĂme avec le sous- solution possible titrage codĂ mon appareil montre des sous-titres âą vous regardez une Ă©mission en direct et les fautes d'orthographe faites mal orthographiĂ©s. âą par la sociĂ©tĂ© de production du sous-titrage codĂ© peuvent passer sans âą ĂȘtre corrigĂ©es. Un programm...
Page 101
â 49 â fr 01a11 remarques: âą certaines fonctions ne sont pas disponibles dans certains modes, mais ce nâest pas un dysfonctionnement. Lisez les descriptions de ce guide dâutilisation pour avoir de plus amples dĂ©tails sur la façon correcte de procĂ©der. âą la lecture Ă partir dâune piste voulue et la l...
Page 102: Manipulation Des Disques
â 50 â fr 01a11 nettoyage du boĂtier âą essuyez le panneau de commande et les autres sur- faces extĂ©rieures de lâappareil avec un chiffon imbibĂ© dâeau tiĂšde et sĂ©chez-les. âą nâutilisez jamais ni solvant ni alcool. Ne vaporisez pas dâinsecticide prĂšs de lâappareil. Ces produits chimiques risquent dâen...
Page 103: Caractéristiques
â 51 â fr 01a11 Ăcran : canon en ligne de 20 pouces, tube Ă parcours Ă©lectronique dirigĂ© Ă 90Âș systĂšme de tĂ©lĂ© : ntsc-m systĂšme de sous-titrage codĂ© : §15.119/fcc tĂȘtes vidĂ©o : rotatif Ă quatre tĂȘtes largeur de la bande : 1/2 pouce vitesse dâenregistrement sp : 33,40 mm/seconde lp : 16,67mm/seconde ...
Page 104
T1059ck garantie limitĂe funai corp. RĂ©parera ce produit Ă titre gratuit au canada en cas de dĂ©faut de matĂ©riau ou de façon comme suit: duree : pieces : funai corp. Fournira les piĂšces pour remplacer les piĂšces dĂ©fectueuses Ă titre gratuit pendant un (1) an Ă partir de la date dâachat au dĂ©tail dâor...