Magnavox MME100 - Audio Micro System User Manual - Cd Operations
14
English
8240 009 34241
CD Operations
IMPORTANT:
The lens of the CD player should never be
touched.
Playing a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select CD source.
2
Press OPEN / CLOSE on
the top of the system to open
the CD compartment.
➜
OPEN is displayed when
you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press down on OPEN / CLOSE to close the
CD door.
➜
READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks are shown.
4
Press
2; to start playback.
➜ Current track number is displayed then
elapsed playing time of the track are displayed
during disc playback.
5
To interrupt playback press
2;. Press 2; again to
resume play.
➜ The display freezes and the current track
number flashes when playback is interrupted.
6
To stop disc playback, press
9.
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER.
– you select to standby.
– you press the tape deck PLAY
2 key.
Selecting a different track
● Press
¡1 or 2™ once or repeatedly until the
desired track number appears in the display.
● If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press
2; to start playback.
Finding a passage within a track
1
Press and hold down on
¡1 or 2™ (on the
remote control
à or á ).
➜ The disc is played at high speed and low
volume.
2
When you recognize the passage you want,
release
¡1 or 2™ (on the remote control à
or
á).
➜ Normal playback continues.
Note:
– During a disc program or if SHUFFLE/ REPEAT
active, searching is only possible within the same
track.
pg001-024_MME100_37-Eng
11/20/2003, 03:58 PM
14