Magnavox MME140 User Manual - page 11
11
English
Switching on/off the system and
selecting functions
1
Press POWER to switch on.
➜
The power indicator lights up.
2
To select your function, adjust the source
selector to CD, TAPE or TUNER.
3
Press POWER to switch the system off.
➜
The power indicator lights off.
Adjusting volume and sound
Adjust the sound with the VOLUME and DBB
controls.
IMPORTANT!
– Adjust the volume to a moderate level
before you plug in the headphones.
Basic Functions/ Radio Reception
Radio reception
1
Push the Source selector to TUNER.
2
Adjust the Band selector to AM, FM or FM
ST. (stereo) to select your desired waveband.
➜
FM ST. indicator lights up when receiving
strong stereo broadcast in the FM ST. postion.
3
Turn TUNING to tune in a radio station.
4
To switch off the radio, press POWER.
Or, adjust the Source selector to TAPE or
CD.
Helpful hints:
To improve radio reception:
– For FM, extend and turn the telescopic antenna
for best reception. Reduce its length if the signal is
too strong.
– To tune to a weak FM station, adjust Band
selector to FM (mono).
– For AM, the set uses a built-in antenna. Direct
this antenna for best reception by turning the
whole set.
p001-p016_MME140_55-Eng
7/10/05, 10:49
11