Magnavox MR41806BT Owner's manual - Radio:
9
Normal operation after paired:
1.
Turn on the BT function of the external BT Device.
2.
In Standby mode, press the ALM OFF/SOURCE/
Button to power on the unit .
3.
Press the ALM OFF/SOURCE/
Button repeatedly until “bt” appears on the display.
The “BT.” Indicator on the display will illuminate and blink.
4.
Wait a few seconds until the unit paired to the external BT Device automatically. (The
Indicator stop blinking).
5.
Play the music on the connected BT Device as usual.
6.
During playback:
Press and release the CLK/MEM/ Button to pause; press again to resume
normal playback.
Press the /HR or /MIN Button repeatedly to skip tracks.
7.
To shut off, press and hold the ALM OFF/SOURCE/
Button until “OFF” appear
on the display then release the button.
RADIO:
FM Band:
1
.
In standby mode, press the ALM OFF/SOURCE/
Button to power on the unit.
2
.
Press the ALM OFF/SOURCE/
Button repeatedly until the FM Frequency (87.5 –
108) appear on the display.
3
.
Press and hold the /HR or /MIN Button to auto search the pervious or next
available FM station. Repeat the same procedure until the desired FM Station is
found.
4
.
If the reception is not good, press the /HR or /MIN Button repeatedly to fine
tune.