Magnavox MRV660 Quick Use Manual
QUICK USE GUIDE
12nc: 3139 246 14752
MRV660
1
what’s in the box
3
connect DVD recorder
(red/white/yellow)
2
prepare remote control
OUT
IN
Cable/satellite box jack panel
CH3 CH4
Cable or
satellite signal
Connect antenna
cable to TV OUT of
DVD recorder
3b
back of DVD recorder
Connect to the
power supply.
3e
Connect the AV cables (yellow plug)
from the DVD recorder’s VIDEO
(CVBS) (OUT 2) jack to the Video
In jack at the back of your TV set.
3c
Connect the AV cables (red/white plugs)
from the DVD recorder’s AUDIO L/R
(OUT 2) jack to the audio input jack at
the back of your TV set.
3d
Connect TV signal
to ANTENNA IN
of DVD recorder
3a
4
start first installation
4a
Press STANDBY-ON 2
on the DVD recorder to
turn it on.
➜
The message 'IS THE TV
ON?' appears on the display
panel.
4b
Turn on the TV power.
Select the correct Video
In channel at the TV.
➜
The first installation menu
will appear on the TV.
4c
{ Language and Country } will appear on the TV.
4d
{ TV Shape } menu will appear on the TV.
Use 3 4 on the DVD recorder’s
remote control to select an item
in the menu. Press 2 to access the
selected item’s options and 1 to
confirm your selection.
LANGUAGE AND COUNTRY
Select Language and Country
Language
Country
Done
Menu
English
Spanish
French
4e
{ Channel Search } menu will appear on the TV.
{Language}
- select on-screen display.
{Country}
- select country of your
residence.
TV SHAPE
Select your TV shape
TV Shape
Done
4:3 Panscan
4:3 Letterbox
16:9
{ TV Shape }
- select TV screen display.
CHANNEL SEARCH
Automatic channel search will find and
store all channels. Make sure to connect
the antenna.
Search channels
Skip Search
Start
{ Channel Search }
- Press OK ro start
automatic TV channel
search.
4f
{ Time and Date } menu will appear on the TV.
TIME AND DATE
Please check the Date and if incorrect, navigate
right to correct the Date.
Time
Date
Done
09:00 PM
06.30.2004
OK
{ Time and Date }
Press 2 to enter correct
time and date. Use 34
keys to change the digit
and press 2 to go to
next digit. Press OK to
confirm
When you complete, select { Done } in the menu and press OK on the remote control.
The DVD recorder is ready for use!
1
3
2