MAGNEPLANAR MMC 2 General Instruction Manual

Page of 4

Download

Bookmark us

Magneplanar MMC 2 General Instruction Manual

Table of Contents

1. Introduction/General Description

2. Carton Contents

3. Packaging

4. Installation and Placement

5. Phasing

6. Speaker Angle Adjustment

7. Bass Management and Processor Settings

8. Tweeter Level Control

9. Service and Shipping

10. Specifications

You don't like to read manuals? We understand, but, please take the time to carefully read

"Placement and Installation" and "Phasing".

Introduction / General Description

Congratulations on your purchase of the Magneplanar MMC 2. The MMC 2 is a 3-way, motorized, speaker

designed for music or home theater applications. The MMC 2 boasts a "faster" midrange and a quasi-ribbon

tweeter and quasi-ribbon super tweeter.

Carton Contents

1 - Pair of MMC 2 with Motorized Wall Mounts

1 - Magnepan "Shaped" Pink Noise CD Test Disk

1 - Long 5/64 inch allen wrench

1 - Speaker Logo

1 - MMC 2 General Instruction Manual

1 - MMC 2 Installation Instruction Manual

1 - Each Mounting Template and Kit

Packaging

Save all packaging. The MMC 2 can be shipped safely only in the original packaging. Should you discard it,

packaging is available from Magnepan.

Page 1
Magneplanar mmc 2 general instruction manual table of contents 1. Introduction/general description 2. Carton contents 3. Packaging 4. Installation and placement 5. Phasing 6. Speaker angle adjustment 7. Bass management and processor settings 8. Tweeter level control 9. Service and shipping 10. Speci...
Page 2: Placement And Installation
4. Placement and installation before a permanent installation is begun, we suggest that the magneplanar temporary mounting kit be used to determine if the selected location gives the desired audio performance for the mmc 2s. A set of mounting brackets are included with the mmc 2 for this purpose. In...
Page 3: Speaker Angle Adjustment
6. Speaker angle adjustment for the best sound, the mmc 2 should be angled so that the panel is on-axis with the listener with a minimum distance from the wall of 30 degrees. (use of the mmc 2 as a dual center channel speaker requires slightly different adjustments. Contact magnepan for dual center ...
Page 4: Tweeter Level Control
A nylon screw is included with the mmc 2 to act as a stop so that the mmc 2 can be adjusted to be parallel with the wall in the closed position. The screw hole is located at the bottom inside edge of the mmc 2. To ensure that the nylon screw will not loosen, wrap teflon plumber's tape on the threads...