1. DL manuals
  2. Magnetek
  3. Transmitter
  4. Enrange XLTX
  5. User Manual

Magnetek Enrange XLTX User Manual

Summary of Enrange XLTX

  • Page 1

    Enrange xltx transmitter (intrinsically safe) wireless controls april 2014 part number: 198-80202-1001 r0 ©copyright 2014 magnetek material handling.

  • Page 2: Your New Radio Remote

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 2 of 24 your new radio remote thank you for your purchase of magnetek’s enrange tm brand xltx radio wireless controls. Magnetek has set a whole new standard in radio-remote performance, dependability, and value with this ...

  • Page 3

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 3 of 24 table of contents 1.0 introduction .................................................................................................................. 4 1.1 product manual safety information ..........................

  • Page 4

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 4 of 24 1.0 introduction thank you for your purchase of magnetek’s enrange™ brand xltx radio wireless controls. These instructions are to be used as a reference for personnel operating the enrange brand xltx radio wireles...

  • Page 5: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 5 of 24 1.2 warnings and cautions throughout this document warning and caution statements have been deliberately placed to highlight items critical to the protection of personnel and equipment. Warning – a warning highlig...

  • Page 6: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 6 of 24 2.0 critical installation considerations warning prior to installation and operation of this equipment, read and develop an understanding of the contents of this manual and the operation manual of the equipment or...

  • Page 7

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 7 of 24 2.2 persons authorized to operate radio controlled equipment only properly trained persons designated by management should be permitted to operate radio controlled equipment. Radio controlled cranes, hoists, lifti...

  • Page 8: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 8 of 24 the operator shall not: lift or move more than the rated load operate the material handling equipment if the direction of travel or function engaged does not agree with what is indicated on the controller use the ...

  • Page 9: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 9 of 24 2.5 pre-operation test at the start of each work shift, or when a new operator takes control of the equipment, operators should do, as a minimum, the following steps before making lifts with any equipment: test al...

  • Page 10: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 10 of 24 2.8 specific conditions of safe use warning potential electrostatic charging hazard. See instructions. The xltx has a maximum measured capacitance from housing and/or accessory to ground of 10pf. When possible, c...

  • Page 11: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 11 of 24 3.0 xltx transmitter standard configuration and operation warning before operating the transmitter familiarize yourself with all safety information in this manual, the corresponding receiver system manual, approp...

  • Page 12: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 12 of 24 3.1 installing battery pack prior to utilizing the xltx transmitter, battery packs must be installed. 3.1.1 approved batteries for intrinsically safe operation the xltx transmitter has been tested and approved fo...

  • Page 13

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 13 of 24 figure 3: separated alkaline battery pack when reinserting the lid onto the outer housing, make sure that the lid aligns with the outer housing and secure all four t10 star bit screws. When placing the battery pa...

  • Page 14

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 14 of 24 3.1.3 spare battery storage compartment the xltx transmitter features a spare battery compartment to store a second battery pack. The second battery pack allows for quick replacement of the primary battery pack w...

  • Page 15

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 15 of 24 3.2.1 turning on the transmitter first, the machine stop switch must be in the raised position (pulled out). Next, push the off- on-start toggle switch to the start position and release it once the status led lig...

  • Page 16

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 16 of 24 note: the led should be continuously blinking at all times. If the led is not blinking the transmitter will need to be rebooted to operate properly. 3.5.2 switch change indicator (rapidly blinking status led) whe...

  • Page 17: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 17 of 24 3.9 connecting the xltx to a computer warning to prevent ignition of flammable or combustible atmospheres, and to avoid compromising intrinsic safety of the equipment, read, understand, and adhere to the live mai...

  • Page 18: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 18 of 24 4.0 transmitter setup the built-in dip switch block can adjust the rf channel. All other settings can only be changed at the factory. 4.1 transmitter setup settings with standard status leds warning to prevent ig...

  • Page 19: Warning

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 19 of 24 warning only perform setting changes to the dip switch block through the ir port in a non-hazardous environment or “safe” zone. Failure to follow this warning could result in serious injury or death, and damage t...

  • Page 20

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 20 of 24 5.0 transmitter channel configuration settings the rf channel can be set via the dip switch block. Sections 5.2 and 5.3 show the channels and protocols available for each transmitter radio frequency option. 5.1 f...

  • Page 21

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 21 of 24 5.2 channel and frequency designations by count 433 mhz: tms and tdma channel channel actual count designator frequency 01) 01 433.000 mhz 02) 02 433.050 mhz 03) 03 433.100 mhz 04) 04 433.150 mhz 05) 05 433.200 m...

  • Page 22

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 22 of 24 5.3 optional frequencies and channels 433 mhz telemotive legacy channel set: tms and tdma channel channel actual count designator frequency 01) ak01 439.8 mhz 02) ak02 439.6 mhz 03) ak03 439.4 mhz 04) ak04 439.2 ...

  • Page 23

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 23 of 24 6.0 general troubleshooting problems possible reasons suggestions transmitter will not turn on batteries are dead or installed backwards; battery holder is damaged. Replace the batteries and confirm they are inst...

  • Page 24

    Enrange xltx intrinsically safe transmitter instruction manual april 2014 page 24 of 24 7.0 technical specifications environmental conditions, during operation: -20 c to 40c / 32f to 104f environmental conditions, storage: -20 c to 40c / 32f to 104f humidity: 0% to 95% noncondensing pressure...