Magnetek Mini-MBT Transmitter Engineered User Manual
Summary of Mini-MBT Transmitter Engineered
Page 1
Mini-mbt transmitter engineered radio remote control part number: 198-80203-0002 r1 june 2015 © 2015 magnetek material handling.
Page 2: Your New Radio Receiver
Enrange mini-mbt instruction manual june 2015 page 2 of 37 your new radio receiver thank you for your purchase of magnetek’s enrange ® brand mini-mbt transmitter radio remote equipment control. Magnetek has set a whole new standard in radio-remote performance, dependability, and value with this line...
Page 3
Enrange mini-mbt instruction manual june 2015 page 3 of 37 table of contents 1. Product manual safety information ................................................................................ 5 1.1 product warranty information .........................................................................
Page 4
Enrange mini-mbt instruction manual june 2015 page 4 of 37 5. Optional programming with rcp ....................................................................................... 24 5.1 access codes .......................................................................................................
Page 5
Enrange mini-mbt instruction manual june 2015 page 5 of 37 1. Product manual safety information magnetek, inc. (magnetek) offers a broad range of radio remote control products, control products and adjustable frequency drives, and industrial braking systems for overhead material handling application...
Page 6: Warning
Enrange mini-mbt instruction manual june 2015 page 6 of 37 warnings and cautions throughout this document warning and caution statements have been deliberately placed to highlight items critical to the protection of personnel and equipment. Warning – a warning highlights an essential operating or ma...
Page 7: Warning
Enrange mini-mbt instruction manual june 2015 page 7 of 37 2. Critical installation considerations warning prior to installation and operation of this equipment, read and develop an understanding of the contents of this manual and the operation manual of the equipment or device to which this equipme...
Page 8: Warning
Enrange mini-mbt instruction manual june 2015 page 8 of 37 have the ability to judge distance of moving objects know how to properly test prior to operation be trained in the safe operation of the radio transmitter as it pertains to the equipment being operated have knowledge of the use of equipment...
Page 9: Warning
Enrange mini-mbt instruction manual june 2015 page 9 of 37 2.4 transmitter unit transmitter switches should never be mechanically blocked on or off. When not in use, the operator should turn the transmitter off. A secure storage space should be provided for the transmitter unit, and the transmitter ...
Page 10: Warning
Enrange mini-mbt instruction manual june 2015 page 10 of 37 do not charge batteries in a hazardous environment. Keep the battery pack environment cool during charging (i.E., not in direct sunlight or close to a heating source). Do not short the charger. Do not attempt to charge a damaged battery. Us...
Page 11
Enrange mini-mbt instruction manual june 2015 page 11 of 37 use the crane, hoist or lifting device to lift, support or transport people lift or carry any loads over people operate the crane, hoist or lifting device unless all persons, including the operator, are and remain clear of the supported loa...
Page 12: Warning
Enrange mini-mbt instruction manual june 2015 page 12 of 37 3. Mini-mbt standard configuration and operation warning before operating the transmitter, familiarize yourself with all safety information in this manual, the corresponding receiver system manual, appropriate manual supplements and any oth...
Page 13
Enrange mini-mbt instruction manual june 2015 page 13 of 37 3.1 installing the battery pack prior to utilizing the mini-mbt transmitter, the battery pack must be installed. 3.1.1 alkaline battery pack (bt151-0) the mini-mbt comes standard with a battery pack (bt151-0) that holds four disposable aa a...
Page 14
Enrange mini-mbt instruction manual june 2015 page 14 of 37 3.1.2 optional nimh rechargeable battery pack (bt150-0) the rechargeable battery pack bt150-0 is a sealed pack that has no user-serviceable components within it. Figure 4: bt150-0 battery pack the rechargeable battery pack bt150-0 is shippe...
Page 15
Enrange mini-mbt instruction manual june 2015 page 15 of 37 3.2.1 machine stop and start push button 1. Ensure the machine stop is in the raised (pulled out) position. 2. After the unit has initialized (refer to sections 3.2.4 and 3.2.5 for initialization), press the start push button to enable comm...
Page 16
Enrange mini-mbt instruction manual june 2015 page 16 of 37 3.2.5 transmitter initialization (with optional graphic user interface screen) upon turning the transmitter on, the lcd screen turns on and the unit will perform a routine initialization. During initialization, the mini-mbt scans for any sw...
Page 17
Enrange mini-mbt instruction manual june 2015 page 17 of 37 3.6 normal operating mode with standard leds 3.6.1 watch dog indicator (steady blinking status led) the blinking led represents the watch dog timer within the cpu of the unit. Note: the led should be continuously blinking at all times. If t...
Page 18
Enrange mini-mbt instruction manual june 2015 page 18 of 37 3.7.2 command confirmation each time the user operates a control on the transmitter, a message will be displayed on the graphic user interface screen confirming what is being operated. 3.7.3 battery life indicator remaining battery life is ...
Page 19: 4. Transmitter Setup
Enrange mini-mbt instruction manual june 2015 page 19 of 37 4. Transmitter setup the transmitter may have settings changed one of three ways. The rf channel and access code can be programmed using the ir configuration link with a compatible receiver. All other settings can only be changed at the fac...
Page 20
Enrange mini-mbt instruction manual june 2015 page 20 of 37 if the link is unsuccessful with a compatible receiver, the status/battery led will continue to blink. To cancel the ir configuration receiver without a successful link, move the off-on-start toggle to the off position. 4.2 using the transm...
Page 21: Warning
Enrange mini-mbt instruction manual june 2015 page 21 of 37 the access code is a 20-bit binary value with a decimal equivalent of 0 - 1048575. It will be displayed as binary or decimal depending on the application. 4.2.2.2 channel select the channel select setting determines the frequency that the m...
Page 22
Enrange mini-mbt instruction manual june 2015 page 22 of 37 backlight timeout can be set from 1 to 30 seconds. Setting timeout to disable will disable the backlight. Setting timeout to “always on” sets the backlight to be on continuously while the transmitter is on and active. Note: leaving the back...
Page 23
Enrange mini-mbt instruction manual june 2015 page 23 of 37 position and release. The graphic user interface will display “attempting” with a countdown of the time while scanning for the receiver’s ir signal. If the receiver is in range and ir link is made, the message will change to “success”. The ...
Page 24: Warning
Enrange mini-mbt instruction manual june 2015 page 24 of 37 5. Optional programming with rcp using the optional rcp software makes programming of the mini-mbt easier and allows for settings to be saved for future reference. Warning the use of rcp (radio control programmer) is intended for use by aut...
Page 25: Warning
Enrange mini-mbt instruction manual june 2015 page 25 of 37 5.2 changing reciever access codes receiver access code programming. For detailed instructions on setting parameters including access codes, see the “programming” section of the applicable receiver manual. Warning after changing the access ...
Page 26
Enrange mini-mbt instruction manual june 2015 page 26 of 37 when plugging in the transmitter to a computer system, the transmitter batteries must be installed. The usb circuit does not provide power to the transmitter. Magnetek highly recommends using a fully charged battery pack when using usb and ...
Page 27
Enrange mini-mbt instruction manual june 2015 page 27 of 37 6. Transmitter channel configuration settings the rf channel can be set via the setup mode or the optional rcp software on systems equipped with the optional graphic user interface. Sections 6.2 through 6.6 show the channels and protocols a...
Page 28
Enrange mini-mbt instruction manual june 2015 page 28 of 37 6.2 433mhz channel set channel frequency 01 433.000 mhz 02 433.050 mhz 03 433.100 mhz 04 433.150 mhz 05 433.200 mhz 06 433.250 mhz 07 433.300 mhz 08 433.350 mhz 09 433.400 mhz 10 433.450 mhz 11 433.500 mhz 12 433.550 mhz 13 433.600 mhz 14 4...
Page 29
Enrange mini-mbt instruction manual june 2015 page 29 of 37 6.3 433 mhz telemotive legacy channel set: tms and tdma channel count channel designator frequency 01) ak01 439.8 mhz 02) ak02 439.6 mhz 03) ak03 439.4 mhz 04) ak04 439.2 mhz 05) ak05 439.0 mhz 06) ak06 438.8 mhz 07) ak07 438.6 mhz 08) ak08...
Page 30
Enrange mini-mbt instruction manual june 2015 page 30 of 37 6.4 419mhz channel set channel frequency channel frequency 1* 418.950 44 417.500 2* 418.975 45 417.550 3* 419.000 46 417.600 4* 419.025 47 417.650 5* 419.050 48 417.700 6* 419.075 49 417.750 7* 419.100 50 417.800 8* 419.125 51 417.850 9* 41...
Page 31
Enrange mini-mbt instruction manual june 2015 page 31 of 37 6.5 900 mhz channel set channel frequency 1 903.30 mhz 2 906.30 mhz 3 907.80 mhz 4 909.30 mhz 5 912.30 mhz 6 915.30 mhz 7 919.80 mhz 8 921.30 mhz 9 902.30 mhz 10 904.10 mhz 11 904.30 mhz 12 905.10 mhz 13 905.50 mhz 14 905.70 mhz 15 906.60 m...
Page 32
Enrange mini-mbt instruction manual june 2015 page 32 of 37 7. Optional can bus tether feature the mini-mbt transmitter can be ordered with an optional can bus tether feature. This feature allows for the operation of the transmitter as a wired transmitter with no wireless radio transmission. If the ...
Page 33
Enrange mini-mbt instruction manual june 2015 page 33 of 37 7.4 can connector receptacle pin-out details the can connector receptacle located on the transmitter has specific pin assignments. It is very critical that these pin assignments are matched in the can cable assembly. 1 2 3 4 5 keyway figure...
Page 34: 8. General Troubleshooting
Enrange mini-mbt instruction manual june 2015 page 34 of 37 8. General troubleshooting problems possible reasons suggestions transmitter will not turn on batteries are dead or installed backwards; battery holder is damaged. Replace the batteries and confirm they are installed according to the polari...
Page 35
Enrange mini-mbt instruction manual june 2015 page 35 of 37 8.1 troubleshooting optional tether operation problems possible reasons suggestions transmitter will not turn on the connecting tether cable is not installed, installed improperly, or is damaged. Inspect the tether cable and confirm that it...
Page 36: 9. Notes
Enrange mini-mbt instruction manual june 2015 page 36 of 37 9. Notes.
Page 37
Enrange mini-mbt instruction manual june 2015 page 37 of 37 10. Eu declaration of conformity.
Page 38: Mini-Mbt Transmitter
P.O. Box 13615 milwaukee, wi 53213 toll-free phone 800.288.8178 toll-free fax 800.298.3503 n49 w13650 campbell drive menomonee falls, wi 53051 phone 262.783.3500 fax 262.783.3510 canada facility 4090b sladeview crescent mississauga, ontario l5l 5y5 canada toll free phone: 800.792.7253 fax: 905.82815...
Page 39: Mini-Mbt Transmitter
P.O. Box 13615 milwaukee, wi 53213 toll-free phone 800.288.8178 toll-free fax 800.298.3503 n49 w13650 campbell drive menomonee falls, wi 53051 phone 262.783.3500 fax 262.783.3510 canada facility 4090b sladeview crescent mississauga, ontario l5l 5y5 canada toll free phone: 800.792.7253 fax: 905.82815...
Page 40: Mini-Mbt Transmitter
P.O. Box 13615 milwaukee, wi 53213 toll-free phone 800.288.8178 toll-free fax 800.298.3503 n49 w13650 campbell drive menomonee falls, wi 53051 phone 262.783.3500 fax 262.783.3510 canada facility 4090b sladeview crescent mississauga, ontario l5l 5y5 canada toll free phone: 800.792.7253 fax: 905.82815...
Page 41: Mini-Mbt Transmitter
P.O. Box 13615 milwaukee, wi 53213 toll-free phone 800.288.8178 toll-free fax 800.298.3503 n49 w13650 campbell drive menomonee falls, wi 53051 phone 262.783.3500 fax 262.783.3510 canada facility 4090b sladeview crescent mississauga, ontario l5l 5y5 canada toll free phone: 800.792.7253 fax: 905.82815...