Magnetek Mini-MBT Transmitter Engineered User Manual - Mini-Mbt Transmitter
P.O. Box 13615
Milwaukee, WI 53213
Toll-Free Phone 800.288.8178
Toll-Free Fax 800.298.3503
N49 W13650 Campbell Drive
Menomonee Falls, WI 53051
Phone 262.783.3500
Fax 262.783.3510
Canada Facility
4090B Sladeview Crescent
Mississauga, Ontario
L5L 5Y5 Canada
Toll Free Phone: 800.792.7253
Fax: 905.8281526
Magnetek (UK) Ltd.
Unit, 3 Bedford Business Centre
Mile Road
Bedford, MK42 9TW UK
Phone: +44 (0) 1234 349191
Fax: +44 (0) 1234 268955
www.magnetek.com
Brochure No. Mini-MBT
Tech Specs
Mini-MBT Transmitter
Technical Specifications
Transmitter Specification
Temperature Range:
•
-
40°F to 185°F (-40°C to 85°C)
Environmental Protection:
• IP66 and NEMA 4 Transmitter
Operation Range:
• Non-Licensed Part 15
Up to 300 feet (91.44 m)
• Non-Licensed FHSS
Up to 2000 feet (609.6 m)
Frequency Range:
• Non-Licensed Part 15
430-439.8 MHz / 902-928 MHz
• Non-Licensed FHSS
2.4-2.5 GHz
• Government Band
411-430 MHz
Output Power:
• Non-Licensed Part 15
Less than 1mW
• Non-Licensed FHSS
10 mW, 125 mW
• Government Band
1mW
RF Channels
• Non-Licensed Part 15
32 channels
• Non-Licensed FHSS
32 channels
• Government Band
Up to 1000 channels
Antenna:
• Internal
RF Type:
• TMS (Time Multiplexed Signaling)
• FHSS (Frequency Hopping Spread Spectrum)
• Microprocessor Controlled PLL Synthesizer
• Transceiver (900MHz/2.4GHz)
Response Time:
• Approximately 50 ms
Test & Certifications:
• FCC Approved Part 15
• IEC 68-2-34 Random Vibration
• IEC 68-2-27 Shock Testing
• IEC 68-2-31 Drop & Topple
• SAE 1211 Dust Testing
Graphic Display:
• Optional
• Backlit display
• 3.77" x 2.83" (96 x 72 mm)
• Multilingual with standard ACSII characters
Weight:
• Approximately 1.5 lbs. (1.13 kg) – dependent upon
configuration
Dimensions:
• Approximately 5.00" x 3.38” x 4.33" (127 x 86 x 110 mm)
Transmitter Component Specifications
A total of 9 inputs are available for analog components.
Joystick:
• Dual axis stepless/proportional, up to 2 per transmitter
• Single axis stepless/proportional, up to 4 per transmitter
• Optional pushbutton, 2 per transmitter
• Square Gate standard, Plus Gate optional
Potentiometers:
• Single turn
A total of 1 output (PWM) is available for an analog component.
Haptic Feedback:
• Optional
A total of 10 toggle switches or 20 inputs are available for digital
components.
Toggle Switch:
• 2 position momentary
• 2 position maintained
• 3 position momentary
• 3 position maintained
• 3 position maintained/momentary
Pushbutton:
• Momentary
• Red, Green, Blue, Black, Yellow
E-Stop:
• Military Grade Push/Pull
Rotary Switch:
• Up to 12 positions per switch
Key Switch:
• 3 position maintained/momentary
• 2 position maintained
A total of 4 outputs are available for digital components. An optional
board is available to increase the number of digital outputs to 16.
LED:
• Red, Yellow, Green
• Up to 2 bi-color or 4 single color per transmitter
USB:
• Programming Port
Infrared Port:
• Programming Port
CAN Port:
• Optional
• J1939
• CANOpen
• Other protocol available upon request
• Power input: 6-36VDC