Magnit RMV-1931 Instruction Manual - page 6
Manual is about: Electric vacuum cleaner
of
24
6
ASSEMBLY OF ACCESSORIES
1. Figure (5) is the accessory bracket. Get the flat nozzle and the combination
brush stuck in the corresponding clips according to the accessory
installation indication shown on the accessory bracket.
Figure (5)
ASSEMBLY OF STAINLESS STEEL TELESCOPIC TUBE AND FLOOR BRUSH
Insert the front end of the hose handle into the telescopic tube according to
Figure (6); then insert the other end of the telescopic tube into the rounded
inlet of the floor brush, and adjust to the proper direction. At this time, the
assembly of the whole machine is completed.
Figure (6)
EN