Magnit RMV-1931 Instruction Manual - page 9

EN

9

Remove the rubbish in the dust barrel frequently to avoid the failure of the

cleaner.

1. Clean the dust barrel only after the power plug of the cleaner has been

pulled out;

2. Put the dust barrel over the rubbish bin (bag), press down the releasing

button of the dust barrel, the bottom cover of the dust barrel will

automatically fall down, and clear and empty the dust barrel, as is shown

in Figure (9).

CLEANING OF THE DUST BARREL

Cleaning of front filter for motor:

Warning: please make sure the power supply of the cleaner has been cut off

before carrying out the following steps:

1. Pull out the power cord plug of the cleaner from the power socket.

2. Press down the handle of the dust barrel to remove the dust barrel, and

remove the cover of the front filter for motor, and then use the brush to

Cleaning of the Dust Barrel

Figure (8)

clean the filter (sponge and filter gauze with composite coating) or place it

under the cock to clean, as is shown in Figure (10).

Figure (9)

Figure (10)