Magnum MI-76100 Operating Manual - Operating Instructions
of
11
4
OPERATING INSTRUCTIONS
FOR MI-76100 and MI 76150 DRILL PRESSES
TABLE ROTATION ADJUSTMENT
1. Loosen the TABLE LOCK HANDLE (3).
2. Rotate the table to the desired position.
3. Retighten the TABLE LOCK HANDLE (3).
TABLE TILT ADJUSTMENT
1. Loosen the PIVOT BOLT (4) and SET SCREW (5).
2. Tilt the table to the desired angle.
3. Retighten the PIVOT BOLT (4) and SET SCREW (5).
DEPTH STOP ADJUSTMENT
1. Set the bottom edge of NUT (1) even with the desired depth setting.
2. Tighten NUT (2) against NUT (1) to secure it in position.
3. Depth stop is now set.
NOTES