Magtek IPAD Installation And Operation Manual - page 13
7
SECTION 2: SYSTEM REQUIREMENTS & DEVICE FEATURES
SYSTEM REQUIREMENTS
• Windows XP or later (32-bit or 64-bit)
• Microsoft .NET Framework version 2.0 (Not required but suggested)
• USB port
Upon installation, Windows will automatically recognize and install the USB drivers for the
device.
DEVICE FEATURES
Physical and Electronic Security
The IPAD enclosure and its associated electronics have been designed to form a Tamper
Resistant Security Module (TRSM). All covers are ultrasonically welded together to ensure that
breakage is visible if any attempt is made to open the unit. Internal spaces within the IPAD have
been minimized to reduce the possibility of unauthorized modifications.
In addition, any attempt to penetrate or modify the IPAD electronically will cause the unit to
permanently erase its stored encryption keys, after which the IPAD will cease to function.
Sleep Mode
When the Windows operating system shuts down or is suspended the IPAD will enter into a
“sleep mode”.
Liquid Crystal Display
The Liquid Crystal Display (LCD) is a customizable color graphics display capable of displaying
static or animated messages.
Function Buttons (Soft Keys)
The three function buttons or “soft keys” are located below the LCD screen. These buttons are
programmable for use with display-based prompts.
10-Digit Numeric Pad
During normal operation the numeric keypad is for PIN entries only. An audio tone will provide
feedback when selecting or entering the card PIN number. There are three additional keys
present that may be used during a transaction: an ENTER button (green), a CLEAR button
(yellow), and a CANCEL button (red).