Mahlkönig DallaCorte DC II GCS User Manual

Summary of DallaCorte DC II GCS

  • Page 1

    1 user’s manual release 1.07 user’s manual for d c ii gcs grinder index - data tag - accessories list - installer’s guidelines - installation - initial set up - setting - alarms management data tag accessories list user’s manual brush for cleaning package of tablets for internal cleaning ground coff...

  • Page 2

    2 user’s manual release 1.07 moreover , the use of any electrical appliance requires certain precautions: - do not operate machine while hands or feet are wet - do not operate machine while barefoot - do not allow children and /or not properly trained people to use the machine - do not clean machine...

  • Page 3

    3 user’s manual release 1.07 description command panel picture 10 start up switch on the general switch of the grinder pic.9. When on the display you see the following screen , it means that the grinder is ready to start working functions of the grinder the normal functions of the d c ii are the fol...

  • Page 4

    4 user’s manual release 1.07 when you have finished the regulation of the grinding, confirm the modification with p5 or wait for % seconds to automatically get out of this option regulations of the machine flow scheme of the menus 7) test 5) reset counter – alarms 6) setup 1)doses programming 2) dos...

  • Page 5

    5 user’s manual release 1.07 user’s menu the user can enter some menus to perform the following operations: how to program doses (p6-p7-p8-p9) from the main screen , press p5 once to see this menu and then p5 once more to enter it and you will see: to modify a dose , press p5 and the value will blin...

  • Page 6

    6 user’s manual release 1.07 visualisation alarms this grinder allows you to see a series of information (alarms) about its functioning to see possible alarms ,press p5 once from the main screen and then p3 for three times , then you will see : if you press p5 again, you can see one or more of the f...