Mahlkönig DallaCorte DC II GCS User Manual - page 2
2
USER’S MANUAL
RELEASE 1.07
Moreover , the use of any electrical appliance requires certain precautions:
-
Do not operate machine while hands or feet are wet
-
Do not operate machine while barefoot
-
Do not allow children and /or not properly trained people to use the machine
-
Do not clean machine by spraying water on it
-
Do not leave machine on while it is unattended
INTRODUCTION
The D C II grinder on-demand is made of two separate grinders, regulated by only one electronic system
allowing them to work separately and independently from each other.
This electronic system offers the possibility of programming the grinding time and the coffee grinding
digitally , moreover if it is connected to a 20.03 Dalla Corte coffee machine through an appropriated
serial cable , you can activate the GCS system (grinder control system) .
The GCS system is the control and regulation of the grinding through the espresso coffee machine,
which controls each coffee supply and when the parametres of the coffee supply do not correspond to
those programmed in the set-up of the system , it sends a notification to the grinder with the correct
grinding regulation and the correct grinding time.
INSTALLATION
GRINDER GENERAL DESCRIPTION
PICTURE 9