Mahlkonig VTA6S Operating Instructions Manual - page 9

|

L A D E N M Ü H L E N

S H O P   G R I N D E R S

After the grinder has been connected, check the di-

rection of rotation of the grinding disc (arrow on the 

hopper). If the grinder is rotating in the wrong direc-

tion ask an electrician to reverse the polarity of the 

socket in compliance with DIN standards.*

6. Operation

6.1 Operating Instructions

1.  Position the stop lever of the grind degree setting to the grind de-

gree you require (Pos. 3).

2. Now 

fi ll the coffee beans into the hopper. Close the hopper.

3.  Push the completely opened bag over the spout all the way to the 

black stop. Now pull the lever with the black handle (on the right 

hand side of the grinder) to “On”. (Pos. 7) The following processes are 

controlled by lifting the lever:

•  The bag is fi xed in position on the spout.

•  The grinder is switched on.

Do not hold the bag as otherwise the shaking of the 

bag does not work!

4.  After the grinding process has been completed, hold the bag gently 

at its base and push the lever to the “Off” position.

This action controls the following processes:

•  The bag is released from its fi xed position.

•  The machine is switched off.

The inside of the spout is cleaned of ground coffee residues. The le-

ver does not need to be moved up and down to clean the spout.

Moving the lever up and down can damage the elec-

trical components of the grinder.

* only in the case of three phase current (VTA6S)

9