- DL manuals
- Mahlkönig
- Coffee Grinder
- W401
- Operating Instructions Manual
Mahlkönig W401 Operating Instructions Manual
Summary of W401
Page 1
l a d e n m Ü h l e n s h o p g r i n d e r s the professional art of grinding since 1924 operating instructions w401.
Page 2
l a d e n m Ü h l e n s h o p g r i n d e r s dear customer, with the „w401“ you have purchased a grinder in the well-known mahlkÖnig quality. Our over 80 years of experience in the production and development of grinders have helped us to develop this product in the mahlkÖnig company. As usual, t...
Page 3
l a d e n m Ü h l e n s h o p g r i n d e r s 7. Operating faults 9 8. Recalibration of the grind adjustment 10 9. Cleaning 11 9.1 cleaning with grindz™ grinder cleaner 11 9.2 cleaning of the grinder casing 12 9.3 cleaning of the grinding mechanism 12 10. Maintenance and repair 13 10.1 grinding d...
Page 4
l a d e n m Ü h l e n s h o p g r i n d e r s never put your fi ngers or objects into the rotating grinding mechanism underneath the hopper. Always pull the power supply plug out of the outlet before carrying out any maintenance or cleaning work on the grinder. Never put the grinder into service w...
Page 5
l a d e n m Ü h l e n s h o p g r i n d e r s 2. Technical data description w 401 voltage / frequency 230-240v / 50hz motor rotations 1400 rpm pre-fuse building 16 a-slow overload circuit breaker 10a sound emission idle operation 65 db grinding 85 db permissible max. Operating time of the grinder...
Page 6
l a d e n m Ü h l e n s h o p g r i n d e r s 3. Description the main components and operating elements are shown in the fi gure. Pos. 1 hopper with lid pos. 2 cladding pos. 3 grind adjustment lever pos. 4 spout pos. 5 vibrating sheet pos. 6 residue tray pos. 7 on / off-switch pos. 8 reset button ...
Page 7
l a d e n m Ü h l e n s h o p g r i n d e r s 5. Setting-up and basic adjustment a grinding test run is carried out on each grinder in the factory. This is why you may fi nd ground material residue in the grinding mechanism! 5.1 setting-up area place the grinder on a level surface free from vibrat...
Page 8
l a d e n m Ü h l e n s h o p g r i n d e r s the bag is shaken by this shaking panel. Do not hold the bag during the grinding process so that it is positioned against the shaking panel fully opened. 5. After all coffee has been ground hold the base of the bag loosely in one hand and with the oth...
Page 9
l a d e n m Ü h l e n s h o p g r i n d e r s defect the grinder hums but does not grind. 7. Operating faults cause the spout is clogged. Grinding is set too fi ne. A foreign object is in the grinding mechanism. Remedy set grinding fi neness to „coarse“ and start the grinding process. The grind- er...
Page 10
l a d e n m Ü h l e n s h o p g r i n d e r s defect grinder rotates but without grinding. In case of other malfunctions or continued faults, please contact your dealer or your authorised customer service centre. Cause metal parts on the hopper mag- net obstruct the incoming fl ow of material to b...
Page 11
l a d e n m Ü h l e n s h o p g r i n d e r s 5. Now carefully move the grind adjustment lever in the direc- tion of position „1” until you hear a rattling noise, then im- mediately turn it back by 1 or 2 notches. The rattling sound is created by the grinding discs coming into contact with one an...
Page 12
l a d e n m Ü h l e n s h o p g r i n d e r s 9.2 cleaning the grinder casing clean the casing of your grinder every now and then with com- mercially available mild cleaning agents. In addition, you should also clean the magnet in the hopper from time to time by remo- ving any foreign objects tha...
Page 13
l a d e n m Ü h l e n s h o p g r i n d e r s 5. Put the upper part of the casing back on and close the quick release locks. Make sure that the screw in the grinder casing cover engages in the hole in the grinder casing. There is a safety switch underneath this hole which prevents the grinder bei...
Page 14
l a d e n m Ü h l e n s h o p g r i n d e r s if this is not done, the grinding discs are not parallel to one another and the ground coffee would be coarse and uneven. 3. Make sure that the surfaces are very clean when you place the upper part of the casing in its position. Proceed as descri- bed...
Page 15
l a d e n m Ü h l e n s h o p g r i n d e r s 13. Warranty conditions 1. The warranty period is 1 year from the date of purchase. 2. The warranty covers all damages that can be attributed to inferior materials or defective workmanship. Corresponding grinders will be repaired or replaced free-of-c...
Page 16: Mahlkönig Gmbh & Co. Kg
l a d e n m Ü h l e n s h o p g r i n d e r s the professional art of grinding since 1924 mahlkÖnig gmbh & co. Kg tilsiter straße 142 d- 22047 hamburg, germany tel.: +49 (0)40 / 69 69 40-0 fax: +49 (0)40 / 69 39 721 offi ce@mahlkoenig.De ; www.Mahlkoenig.De november 2009 subject to change without ...