Maidaid Halcyon Evolution 2021 Instruction Manual - page 11
INSTRUCTION MANUAL FOR DISHWASHERS
Page 8 of 20
MDI TT28-26 - 02
UK
Chap 2
RISKS AND IMPORTANT WARNINGS
•
This appliance is to be used only for the use for which it was expressly designed. All other uses are to be
considered unfit and therefore dangerous.
•
The specialised personnel who will install the machine are obliged to appropriately instruct the
user on the appliance’s operation and any safety measures that are to be complied with, also by
providing practical demonstrations.
•
Any type of service done on the machine, also in case of failure, must be performed only by the
manufacturer or by an authorised service centre and by qualified personnel, using only original spare
parts.
•
Always disconnect or separate the machine from the electric and water networks before performing
maintenance, repairs or cleaning.
•
Untrained personnel must NOT use the machine.
•
The machine must NOT remain powered on when it is not in use.
•
NEVER open
the machine door quickly if it has not finished the cycle.
•
NEVER
use
the machine without the factory-installed safety attachments
.
•
NEVER use
the machine for washing object of a type, shape, size or material not guaranteed for machine
washing or not perfectly intact.
•
NEVER
use
the appliance or its parts as a ladder or support for people, things or animals.
•
NEVER overload
the open door of front-loading machines, which are sized to support only the rack loaded
with kitchenware.
•
NEVER
immerse
bare hands in the washing solutions.
•
NEVER
turn the machine over after installation.
•
If you notice a malfunction or leakage of liquids, immediately disconnect the electricity and shut off the
water supply.
THE FOLLOWING IS ALSO IMPORTANT:
•
Never start a wash programme without the overflow in the tub. .(Machines with overflow device).
•
Before you drain the tub, make sure you shut off the machine.
•
Never place magnetic objects near the machine, it may start even when the door is open.
•
Do not use the upper part of the machine as a support surface.
•
The machine may not be used by persons who are unauthorized or who have not been properly trained.
•
The installation technician is required to check for proper earthing.
•
When testing is complete, the installation technician must issue a written statement concerning correct
installation and testing in accordance with all standards and acceptable working practices.
2.1
NORMAL SERVICE CONDITIONS
Ambient Temperature : 40°Cmax /4°Cmin ( average 30 °C)
Altitude : until 2000 metrical
Relative humidity: max 30% at 40°C / max 90% at 20°C
Transport and Storage : between -10°C and 5 5°C with peack until 70°C ( max 24 hrs )