Maidaid Halcyon Evolution 2021 Instruction Manual - page 16
INSTRUCTION MANUAL FOR DISHWASHERS
MDI TT28-26 - 02
Page 13 of 20
UK
STEEL washing program
The program is suitable for washing forks, spoons, knives and all kinds of
cutlery. This washing program has a longer duration compared to the other
ones.
GREEN washing program
GREEN washing program reduces energy consumption by diminishing
washing temperatures and water consumption compared to the normal
washing program, good washing results are achieved by using a prolonged
mechanical washing action.
NEW washing program
NEW washing program is recommended when you need to completely
replace the water in the washing tank, hence to consecutively wash dishes
with excess fats or oils.
Complete replacement of water in the tank requires a longer cycle.
SANITIZER washing program
Sanitizer program is recommended when you need to ensure sanitation of
the dishes.
This program controls washing temperature and time by calculating the
constant A0. The program ends when the value of A0 is 30.
Therefore, duration is variable, on average it takes about 20 minutes and
the washing temperature reaches about 72 °C.
In the event that you need an A0 value different from 30, contact an
authorized technician, who will make a change on the machine software.
3.7
VIEWING TEMPERATURES AND NUMBER OF RUN PROGRAMS
It is possible to view the operating temperature by pressing button 3 for a few seconds, the information will
appear as follows:
The first screen displays rinse instantaneous temperature showing the correct set of
achievement; through P3 it is possible to display the following screen which shows
washing instantaneous temperature, then the number of machine life cycles, and
finally any alarms in progress.
3.8
ENABLING AND DISABLING AUTOMATIC START
Automatic start is self-enabled every time a washing program starts: