© baxi heating uk ltd 2011 user’s guide and important warranty information combi 24 he please keep these instructions in a safe place. If you move house, please hand them over to the next occupier. Supplied by heatingspares247.Com.
2 © baxi heating uk ltd 2011 natural gas main combi 24 he g.C.N o 47 474 02 1.0 quick reference guide 3 2.0 troubleshooting 4 3.0 repressurising the system 6 4.0 fault indication 7 5.0 clearances & cleaning 8 6.0 legislation 9 7.0 notes 10 8.0 emergency 11 9.0 warranty & service 12 section page cont...
1.0 quick reference guide 3 © baxi heating uk ltd 2011 reset burner on flame failure power on bar 0 1 2 3 4 reset burner on flame failure power on bar 0 1 2 3 4 on/off/reset selector switch indicator neons central heating temperature control domestic hot water temperature control system pressure gau...
2.0 troubleshooting 4 © baxi heating uk ltd 2011 start make sure the gas supply is turned on and check if other gas appliances are operating (e.G. Fire, cooker). If no gas, consult your supplier. Is the on/off/reset select switch in the ( ) position and the power on indicator lit ? Is the ( ) and th...
2.0 troubleshooting 5 © baxi heating uk ltd 2011 is the timer on and calling for heat ? Ensure timer is set for central heating on (see any instructions supplied with timer). Is the room thermostat (if fitted) set high enough ? 15 10 5 20 25 15 10 5 20 25 turn room thermostat to maximum setting (typ...
3.0 repressurising the system 6 © baxi heating uk ltd 2011 bar 0 1 2 3 4 bar 0 1 2 3 4 fig. 1 fig. 2 normal pressure requires repressurising tap tap cap wing nut loop connected boiler taps & connections, as viewed from underneath 3.1 central heating system pressure 1. The water pressure in the centr...
4.0 fault indication 7 © baxi heating uk ltd 2011 4.1 fault indication 1. Your main combi 24 he has three neon indicators. The upper two function as boiler on and fault indicators. 2. Depending on the nature of the fault the upper two neons will illuminate, go off or flash. 3. There are five possibl...
5.0 clearances & cleaning 8 © baxi heating uk ltd 2011 fig. 4 200mm min 780mm 450mm 200mm min 5mm min 5mm min 450mm min for servicing purposes in operation 20mm/5mm min see *note: 5.1 for your safety 1. This appliance must have been installed in accordance with the manufacturer’s instructions and th...
6.0 legislation 9 © baxi heating uk ltd 2011 6.1 installation, commissioning, service & repair 1. This appliance must be installed in accordance with the manufacturer’s instructions and the regulations in force. Read the instructions fully before installing or using the appliance. 2. In gb, this mus...
7.0 notes 10 © baxi heating uk ltd 2011 supplied by heatingspares247.Com.
8.0 emergency 11 © baxi heating uk ltd 2011 gas tap heating flow, heating return and mains water inlet isolating valves fig. 6 fig. 7 in an emergency if a water or gas leak occurs or is suspected, the boiler can be isolated at the inlet valves as follows; 1. Using a suitable open ended spanner, turn...
9.0 warranty & service © baxi heating uk ltd 2011 comp n o 5115813 - iss 10 - 2/11 information label all descriptions and illustrations provided in this leaflet have been carefully prepared but we reserve the right to make changes and improvements in our products which may affect the accuracy of the...
