1. DL manuals
  2. Main
  3. Water Heater
  4. Combi 24 HE
  5. User's Manual And Important Warranty Information

Main Combi 24 HE User's Manual And Important Warranty Information

Summary of Combi 24 HE

  • Page 1

    User’s guide and important warranty information combi 24 this is a wall mounted combination boiler gas fired central heating unit. The boiler meets the requirements of statutory instrument “ the boiler (efficiency) regulations 1993 n o 3083” and is deemed to meet the requirements of directive 92/42/...

  • Page 2

    2 where fitted, user label for optional timer to be applied here. Dear user thank you for choosing a main combination boiler. The following instructions are simple basic steps that you can take to ensure years of trouble free heating and hot water for your home. Points to note this is a gas fired, r...

  • Page 3

    2 1 0 4 3 bar reset burner on flame failure power on 3 operating the boiler the central heating and hot water you need will be available when the gas and electricity supplies to the boiler are turned on with the timer and other heating controls in your system set correctly. Other heating controls ar...

  • Page 4

    4 fault indication 1. Your main combi 24 he has three neon indicators. The upper two function as boiler on and fault indicators. 2. Depending on the nature of the fault the upper two neons will illuminate, go off or flash. 3. There are five possible combinations, each indicating one or more fault co...

  • Page 5

    5 temperature control 1. Central heating: the central heating hot water flow temperature can be adjusted between 30° c (± 5° c) minimum and 85° c (± 5° c) maximum. 2. Turn the control knob clockwise to increase the temperature (fig. 6). 3. In normal winter usage we recommend that the central heating...

  • Page 6

    6 central heating system pressure 1. The water pressure in the central heating system is indicated by the pressure gauge. 2. With the system cold and the boiler not operating the pressure should be between 0.5 and 1.0 bar. During operation the pressure should not exceed 2.5 bar, and will normally be...

  • Page 7

    7 servicing and repair of your boiler heateam can service and repair your boiler if your installer is not able to. Our baxi potterton trained heating experts will quickly get your heating and hot water working again. If your boiler is out of its free 12 month period, heateam can provide a competitiv...

  • Page 8

    8 for your safety this appliance must have been installed in accordance with the manufacturer’s instructions and the regulations in force. Any modification that may interfere with the normal operation of the appliance without express written permission from the manufacturer or his agent could invali...

  • Page 9

    9 fig. 13 fig. 14 2 1 0 4 3 bar reset burner on flame failure power on 200mm min 780mm 450mm 200mm min 5mm min 5mm min 8mm min 450mm min for servicing purposes in operation.

  • Page 10

    10 no heating/hot water user to check fault diagnosis contact your installer installer unable to rectify fault contact heateam important information you need to arrange an appointment: - product serial number - make and model - installer details - proof of purchase contact heateam 08706 096 096 inst...

  • Page 11: Warning !

    11 if you smell gas turn off the gas supply at the meter and call your gas supplier immediately. It is possible to isolate the boiler and at the isolating valve (fig. 15). In gb, transco operate a 24 hour emergency service and the telephone number will be listed in your telephone directory. Faulty b...

  • Page 12

    B a x i p o t t e r t o n a trading division of baxi heating uk ltd brownedge road bamber bridge preston lancashire pr5 6up after sales service 08701 655 644 technical enquiries 08706 049 049 website www.Baxipotterton.Co.Uk company publication no. 5115811 - iss. 2 (05/2005) serial number date of ins...