Majestic Appliances MJ-9000V Technical Manual - page 23
23
Plug terminal RV7 of wiring to 7 terminal of regulator
8
_Plug speed regulator to regulator support until clamp in action.
9
_Use two screw SD3.5x13 fix regulator assembly to cabinet.
10_ Test the machine to sure the machine can work normal.
11_ Recovery the top panel assembly.
12_ Complete.
How to change drying timer
1
_Disconnect power from machine.
2_Remove top panel assembly by removing two size SD3.5x13mm
screws.
3_pull out timer knob from control panel.
4_unscrew two screw size M4x6 from control panel.
5_take out drying timer from control panel.
6_pull out all terminals of wiring.
7_change a new timer and connect terminals as fellow:
Plug terminal No: TAA of wiring to “a” terminal of timer,
Plug terminal No: TAA1 of wiring to “a1” terminal of timer,
Plug terminal No: TAB of wiring to “b” terminal of timer,
Plug terminal No: TAB1 of wiring to “b1” terminal of timer,
Plug terminal No: TAC of wiring to “c1” terminal of timer,
Plug ground terminal (green) of wiring to ground terminal of timer,
8_Use two screws size M4x6 amount timer to control panel .
9_Test machine.
10_Amount top panel assembly.
11_Complete.