Make Noise CONTOUR Manual - page 10
10
Patch Ideas Analog/Control Voltages:
Voltage Controlled Transient Generator (Attack/ Decay Envelope)
Set Sustain Panel Control Full CCW. A gate applied to the Gate Input starts the transient function, which rises from 0V to 8V at a
rate determined by the Onset parameter, then falls from 8V to 0V at a rate determined by the Decay parameter. This function is
re-trigger-able during the falling portion. Onset and Decay are independently Voltage-Controllable, with response as set by the
Vari-Response Panel Control.
Voltage Controlled Sustained Function Generator (A/S/R Envelope)
Set Sustain Panel Control Full CW. A gate applied to the Gate Input starts the function which rises from 0V to 10V at a rate
determined by the Onset parameter. The function Sustains at that level until the Gate signal ends, then falls from that level to 0V
at a rate determined by the Decay parameter. Onset and Decay are independently Voltage-Controllable, with response as set by
the Vari-Response Panel Control.