Make Noise CONTOUR Manual - page 14
Patch Ideas Analog/Control Voltages:
The New Vactrol Free Bongo:
Set up a VCO for Two-Operator FM by applying a Sine wave to its Linear FM input or using the DPO’s FM Bus and patching the
resulting waveform to DynaMix’s Signal Input. Set the associated attenuator to 4:00. Patch an Exponentially-shaped Envelope CV
with a fast Rise or Onset and a slower Fall or Decay and no Sustain to the Level CV Input. Set the associated Level Combo Pot
(attenuator) to 1:00. Trigger the envelope CV.
Gate Controlled Crossfader
Use this patch to fade between any two audio or CV sources, flying at the speed of an envelope.
Variation: Gate controlled switch
Set Onset and Decay full CCW, use EON and EOC instead of Contour and Mirrored Output.
14
Patch Ideas Analog/Control Voltages:
SideChain/Ducking
Gating the Contour opens Dynamix Channel 1 creating an envelope for VCO 2 and simultaneously “ducking” Ch2 based on the
loudness of the Ch1 output and the setting of the DYMC input attenuverter.