Make Noise DynaMix Manual - page 10
10
Patch Ideas
The New Vactrol Free Bongo:
Set up a VCO for Two-Operator FM by
applying a Sine wave to its Linear FM
Input or using the DPO’s FM Bus and
patching the resulting waveform to
DynaMix’s Input. Set the associated
attenuator to 4:00. Patch an
Exponentially-shaped Envelope CV
with a fast Rise or Onset and a slower
Fall or Decay and no Sustain to the
Level CV Input. Set the associated
Level Combo Pot (attenuator) to 1:00.
Trigger the envelope CV.
Gate Controlled Crossfader
Use this patch to fade between any
two audio or CV sources, flying at the
speed of an envelope.
Variation: Gate controlled switch
Set Onset and Decay full CCW, use EON
and EOC instead of Contour and Mirror
Out.
SideChain/Ducking
Gating the Contour opens Dynamix
Channel 1 creating an envelope for
VCO 2 in order to “duck” Ch2 based
on the loudness of the Ch1 output
and the setting of the DYNMC
input attenuverter.
From Gate Source