Make Noise Rosie Manual - page 10
10
Patch Examples:
Three-input mixer (2 mono channels + 1
mono/stereo channel) Start with Two-input
mixer patch, and add a third audio source to
one or both of the FX Return inputs. Set
“channel 3” level with Return Level control.
Ping Pong Reverb
Patch audio of your choice to either or both of the Rosie inputs. Patch SEND Output to Erbe-Verb Input. Set Erbe-Verb Mix to
100% wet. Patch Erbe-Verb Left Output to Optomix Ch.1 Signal Input and Erbe-Verb Right Output to Optomix Ch.2 Signal Input.
Set up MATHS for 281 Quadrature mode (see MATHS manual). Start with MATHS CH1 Cycing in order to Trigger Ch.4. Then, turn
off Cycling on Ch.1. If performed correctly, the two Cycles on MATHS should be 180 degrees out of phase with one another.
Now, patch MATHS Ch.1 Unity Output to Optomix Ch.1 CONTROL Input and MATHS Ch4 Unity Output to Optomix Ch.2 CONTROL
Input. Patch Optomix Ch.1 Output and Ch.2 Output to M and S Return Inputs on Rosie. Set Return level, MATHS, and Erbe-Verb
settings to taste. Take stereo output from Rosie Line Output. (OPTIONAL: use ModDemix instead of Optomix for different
timbres.)
Stomp Box Integration using CV Bus (no adapter cables necessary)
Set up patch of your choice. Patch Send output to Mono input on CV Bus Output stage, setting level withthe CV Bus output Level
knob. Patch CV Bus ¼” output to first input on pedalboard. Patch final output of pedalboard to CV Bus ¼” Input, and set level
with CV Bus input Level knob. Patch Output to Mono Return Input on Rosie, and set Return amount with Return Level control.