Make Noise Soundhack Erbe-Verb User Manual - page 5
Erbe-Verb Panel Controls
1a. Signal IN: AC coupled, expects standard signal level of 10Vpp signal.
1b. Level Control for Signal IN: unity at 3 o' Clock
2a. MIX CV IN: unipolar control input. Range 0V to +5V.
2b. MIX Panel Control: blends between DRY (un-processed) signal & WET (processed) Signal. Operates as
Combo Knob, with nothing patched to MIX CV IN, works as standard panel control. With
Signal Patched to MIX CV IN, works as attenuator for that signal.
3a. Left (MONO) Output: 10Vpp (depending upon Level setting and source material), AC coupled. Left portion
of Stereo reverb image, also serves as MONO reverb image.
3b. Right Output: 10Vpp (depending upon Level setting and source material), AC coupled. Right portion of
Stereo reverb image.
4a. SIZE Panel Control: unipolar panel control that sets the Size of the space. Ranges from "coffin" to
"heavens." 35 cu. ft. - 9.3 million cu. ft.
4b. SIZE CV Attenuator: bi-polar attenuator for Size CV IN.
4c. SIZE CV IN: control signal input for Size. Range +/- 5V.
5a. SPEED Panel Control: uni-polar control for Speed of internal modulation.
Using internal clock: 1/2cps - 256 cps, using ext. clock 1/48cps - 9000 cps
5b. SPEED LED: visual indication of Internal Modulation rate.
5c. SPEED CV IN: control signal input for Speed. Range +/- 5V.
1b
2a
1a
3a
3b
2b
4b
4c
5c
4a
5b
5a