MAKELSAN POWERPACK PLUS SERIES User Manual - page 17
POWERPACK PLUS SERIES 1‐3 KVA POWER FACTOR 0,8
17
AG‐SD‐69 Rev. No:1 Rev. Date:18.08.2014 Publish No:1
2. Enter the Bps/OPU setting interface. Press and
hold the function setting key for more than half a
second(less than 2 seconds), then come to setting
interface of bPS, at this time, the letters “bPS”
/”OPU”will light for a long time. The “ON”(or OFF)
or numerical value below the Bps/OPU will flash.
Press and hold the inquiring key or more than
half a second(less than 2 seconds) to determine
whether the bPS function is used or not. If
used,the corresponding word is “ON”, if not, the
word is “OFF”, It can be determined by yourself.
Press and hold the inquiring key or more than
half a second (less than 2 seconds), select the
numerical value in accordance with “OPU”
function. The provided voltages are 208v, 220v,
230v, 240,you can choose anyone by yourself
(The default is 220v)
3. Confirm the Bypass output/output voltage selecting interface. After selecting
ON or OFF or numerical value, press and hold the function setting key for more
than half a second (less than 2 seconds). Now, the bPS/OPU setting function is
completed and The “ON”(or OFF) or numerical value below the Bps/OPU will
light without flash.
4. Exit from the setting interface. Press and hold function setting key for more
than half a second (less than 2 seconds), exit from the setting interface and
return to main interface.
NOTE:
When setting the output voltage, you'd better cut off the load of the UPS first.
4.4. Parameters Inquiring
Press and hold the inquiring key or or more than half a second(less than 2 seconds) to
inquire about items. The inquired items include input, battery, output, load,
temperature.
Press and hold the inquiring key for more than 2 seconds, LCD begins to display the
items circularly and orderly which transfer to another every 2 seconds. Press and hold
the key for some time again, it will return to output status.