Makita 4105KB Instruction Manual - Functional Description
6
FUNCTIONAL DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Adjusting the depth of cut
1
2
005157
Loosen the wing nut on the depth guide and move the
base up or down. At the desired depth of cut, secure the
base by tightening the wing nut.
CAUTION:
•
After adjusting the depth of cut, always tighten the
wing nut securely.
Sighting
1
010831
Align the notch in the front of the base with your cutting
line on the workpiece.
Switch action
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and returns
to the "OFF" position when released.
1
2
014148
For tool with lock-off button
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.
CAUTION:
•
Do not pull the switch trigger hard without pressing
in the lock-off button. This can cause switch
breakage.
For tool without lock-off button
1
005160
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
Overload protector
1
005161
The overload protector automatically cuts out to break
the circuit and the button pops out, whenever heavy work
is prolonged. Wait 20 - 30 seconds before pressing the
restart button to resume operation. Your finger should not
be on the switch trigger when you press the restart button,
however.
1. Switch trigger
1. Switch trigger
2. Lock-off button
1. Restart button
1. Notch
1. Wing nut
2. Base