6704d/6704dw 6706d/6706dw specifications model 6704d 6706d capacities bolt, nut and machine screw ............................................... 4 mm – 6 mm 4 mm – 6 mm square drive ........................................................................ 9.5 mm or 6.35 mm 9.5 mm or 6.35 mm no load ...
1 2 3 4 5 6 1 2 1 3 4 5 6 7 9 8 a b q 0 e w 7 8 r y t u 9.5 mm or 6.35 mm 6704d/dw 6706d/dw (illust) 1 (’99. 4. 19) 2.
Symbols the following show the symbols used for machine. Be sure that you understand their meaning before use. [ indoor use only [ read instruction manual. [ double insulation [ do not short batteries. Ni-cd [ always recycle batteries. Cd [ do not discard batteries into garbage can or the like. 6704...
English explanation of general view 1 battery cartridge 2 set plate 3 charging light 4 battery charger 5 hole for detent pin 6 detent pin 7 square drive 8 bit with form c 6.3 shank 9 round drive 0 switch trigger q reversing switch w clockwise rotation e counterclockwise rotation r number t adjusting...
21. Disposal of battery – ensure battery is disposed of safety as instructed by the manufacturer. Important safety instructions for charger & battery cartridge 1. Save these instructions — this manual contains important safety and operating instructions for battery charger. 2. Before using battery c...
Operating instructions installing or removing battery cartridge (fig. 1) • always switch off the machine before insertion or removal of the battery cartridge. • to remove the battery cartridge, pull out the set plate on the machine and grasp both sides of the cartridge while withdrawing it from the ...
Reversing switch action (fig. 6) caution: • always check the direction of rotation before opera- tion. • use the reversing switch only after the machine comes to a complete stop. Changing the direction of rotation before the machine stops may damage the machine. This machine has a reversing switch t...
Made in japan 6704d/dw 6706d/dw general (e) ('100. 3. 17) 884198c9.