Makita BDA341 Instruction Manual

Summary of BDA341

  • Page 1

    1 english ( o rigina l in st ruct ions) instruction manual important: read before using. Cordless angle drill bda341 bda351 008960

  • Page 2: Specifications

    2 english (original instructions) specifications model bda341 bda351 steel 10 mm 10 mm capacities wood 25 mm 25 mm no load speed (min -1 ) 0 - 1,700 0 - 1,800 overall length 326 mm 326 mm net weight 1.7 kg 1.8 kg rated voltage d.C. 14.4 v d.C. 18 v • due to our continuing programme of research and d...

  • Page 3: General Power Tool Safety

    3 30.1.2009 000230 tomoyasu kato director makita corporation 3-11-8, sumiyoshi-cho, anjo, aichi, 446-8502, japan gea006-2 general power tool safety warnings warning read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/o...

  • Page 4: Cordless Drill Safety

    4 accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 20. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools...

  • Page 5: Save These Instructions.

    5 your eyesight. 5. Do not short the battery cartridge: (1) do not touch the terminals with any conductive material. (2) avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) do not expose battery cartridge to water or rain. A battery short can cause ...

  • Page 6: Assembly

    6 • overloaded: the tool is operated in a manner that causes it to draw an abnormally high current. In this situation, release the trigger switch on the tool and stop the application that caused the tool to become overloaded. Then pull the trigger switch again to restart. If the tool does not start,...

  • Page 7: Operation

    7 caution: • always be sure that the side grip is installed securely before operation. Screw the side grip on the tool securely. The side grip can be installed on either side of the tool, whichever is convenient. Installing or removing drill bit 1 008964 hold the tool firmly and turn the sleeve coun...

  • Page 8: Optional Accessories

    8 optional accessories caution: • these accessories or attachments are recommended for use with your makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need a...

  • Page 9

    9.

  • Page 10

    10

  • Page 11

    11.

  • Page 12

    12 makita corporation anjo, aichi, japan www.Makita.Com 884823d228.