1 english (o rigina l in st ruct ions) instruction manual important: read before using. Cordless driver drill bdf441 bdf451 006716.
2 english (original instructions) specifications model bdf441 bdf451 steel 13 mm 13 mm wood 50 mm 65 mm wood screw 6 mm x 75 mm 10 mm x 89 mm capacities machine screw 6 mm high (3) 0 - 1,700 medium (2) 0 - 600 no load speed (min -1 ) low (1) 0 - 300 overall length 238 mm net weight 2.3 kg 2.4 kg rat...
3 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or enta...
4 29. Follow instruction for lubricating and changing accessories. 30. Keep handles dry, clean and free from oil and grease. Geb051-4 cordless drill safety warnings 1. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 2. Hold power tool by insulated gripp...
5 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 3 012089 • always switch off the tool before installing or removing of the battery car...
6 note: • use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. Reversing switch action a b 1 006720 this tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the a side...
7 the fastening torque is minimum when the number 1 is aligned with the pointer, and maximum when the marking is aligned with the pointer. The clutch will slip at various torque levels when set at the number 1 to 16. Before actual operation, drive a trial screw into your material or a piece of dupli...
8 • when driving wood screws, predrill pilot holes to make driving easier and to prevent splitting of the workpiece. See the chart. Nominal diameter of wood screw (mm) recommended size of pilot hole (mm) 3.1 2.0 - 2.2 3.5 2.2 - 2.5 3.8 2.5 - 2.8 4.5 2.9 - 3.2 4.8 3.1 - 3.4 5.1 3.3 - 3.6 5.5 3.7 - 3....
9 1 006731 make sure that the carbon brush caps have fit into the holes in brush holders securely. 1 2 006304 reinstall the rear cover and tighten two screws securely. To maintain product safety and reliability, repairs, any other maintenance or adjustment should be performed by makita authorized se...
10
11.
12 makita corporation www.Makita.Com 884639-5.
