1. DL manuals
  2. Makita
  3. Drill
  4. BDF442
  5. Instruction Manual

Makita BDF442 Instruction Manual - Accessories

Summary of BDF442

  • Page 1

    1 engl ish instruction manual warning: for your personal safety, read and understand before using. Save these instructions for future reference. Cordless driver drill bdf442 bdf452 007698.

  • Page 2: Specifications

    2 english specifications model bdf442 bdf452 steel 13 mm 13 mm wood 38 mm 38 mm wood screw 6 mm x 75 mm 10 mm x 89 mm capacities machine screw m6 m6 high (2) 0 - 1,400 0 - 1,500 no load speed (min -1 ) low (1) 0 - 400 0 - 400 overall length 197 mm 197 mm net weight (with type of battery cartridge) 1...

  • Page 3: General Safety Rules

    3 gea002-3 general safety rules warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (c...

  • Page 4: Specific Safety Rules

    4 tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Battery tool use and care 23. Ensure the switch is in the off position before inserting battery pack. Inserting t...

  • Page 5: Save These Instructions.

    5 8. Be careful not to drop or strike battery. Save these instructions. Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charg...

  • Page 6: Assembly

    6 reversing switch action 1 a b 007421 this tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the a side for clockwise rotation or from the b side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the swi...

  • Page 7: Operation

    7 installing bit holder (optional accessory) 1 2 007700 fit the bit holder into the protrusion at the tool foot on either right or left side and secure it with a screw. When not using the driver bit, keep it in the bit holders. Bits 45 mm long can be kept there. Hook (optional accessory) 1 2 3 00770...

  • Page 8: Maintenance

    8 drilling in metal to prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the bit in the indentation and start drilling. Use a cutting lubricant when drilling metals. The exceptions are iron and brass ...

  • Page 9: Accessories

    9 reinstall the rear cover and tighten two screws securely. To maintain product safety and reliability, repairs, any other maintenance or adjustment should be performed by makita authorized service centers, always using makita replacement parts. Accessories caution: • these accessories or attachment...

  • Page 10

    10

  • Page 11

    11.

  • Page 12

    12 makita corporation anjo, aichi, japan 884679b229.