1 english ( o rigina l in st ruct ions) instruction manual important: read before using. Cordless hammer driver drill bhp343 bhp453 009083.
2 english (original instructions) specifications model bhp343 bhp453 concrete 10 mm 13 mm steel 10 mm 13 mm wood 25 mm 36 mm wood screw 5.1 mm x 63 mm 6 mm x 75 mm capacities machine screw 6 mm high (2) 0- 1,300 no load speed (min -1 ) low (1) 0 - 400 high (2) 0 - 19,500 blows per minute (min -1 ) l...
3 model bhp453 work mode: impact drilling into concrete vibration emission (a h,id ) : 10.0 m/s 2 uncertainty (k) : 1.5 m/s 2 work mode: drilling into metal vibration emission (a h,d ) : 2.5 m/s 2 or less uncertainty (k) : 1.5 m/s 2 eng901-1 • the declared vibration emission value has been measured ...
4 8. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 9. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (gfci) protected supply. Use of...
5 geb056-4 cordless hammer driver drill safety warnings 1. Wear ear protectors with impact drilling. Exposure to noise can cause hearing loss. 2. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 3. Hold power tool by insulated gripping surfaces, when per...
6 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 3 009076 • always switch off the tool before insertion or removal of the battery cartr...
7 selecting the action mode 8 6 10 1 2 3 4 009087 this tool employs an action mode changing ring. Select one of the three modes suitable for your work needs by using this ring. For rotation only, turn the ring so that the arrow on the tool body points toward the mark on the ring. For rotation with h...
8 screwdriving operation 009085 first, turn the action mode changing ring so that the arrow on the tool body points to the marking. Adjust the adjusting ring to the proper torque level for your work. Then proceed as follows. Place the point of the driver bit in the screw head and apply pressure to t...
9 • various type of makita genuine batteries and chargers • rubber pad assembly • wool bonnet • foam polishing pad • plastic carrying case note: • some items in the list may be included in the tool package as standard accessories. They may differ from country to country..
10
11.
12 makita corporation anjo, aichi, japan www.Makita.Com 884820c224.
