I n s t r u c t i o n m a n u a l warning: for your personal safety, read and understand before using. Save these instructions for future reference. English angle drill model da3000r model da3000v 003004 double insulation.
2 specifications • due to our continuing programme of research and development, the specifications herein are subject to change without notice. • note: specifications may differ from country to country. Symbols end201-2 the following show the symbols used for the equipment. Be sure that you understa...
3 general safety rules gea001-3 warning: read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (...
4 19. Store idle power tools out of the reach of chil- dren and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. 20. Maintain power tools. Check for misalignment or binding of moving parts,...
5 functional description caution: • always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action caution: • before plugging in the tool, always check to see that the switch lever actuates properly and returns to the “off” position when r...
6 assembly caution: • always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing drill bit to install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and ti...
7 maintenance caution: • always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to...
Makita corporation anjo, aichi, japan 883327c227.
