Makita DA3000R Instruction Manual - Functional
5
FUNCTIONAL
DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
CAUTION:
•
Before plugging in the tool, always check to see that the switch lever
actuates properly and returns to the “OFF” position when released.
For tool with lock-off lever
To prevent the switch lever from being accidentally squeezed, a lock-off lever
is provided. To start the tool, slide the lock-off lever in the direction of the
arrow and squeeze the switch lever. Tool speed is increased by increasing
pressure on the switch lever. Release the switch lever to stop.
A speed control screw is provided so that maximum tool speed can be limited
(variable).
For tool without lock-off lever
To start the tool, simply squeeze the switch lever. Tool speed is increased by
increasing pressure on the switch lever. Release the switch lever to stop.
A speed control screw is provided so that maximum tool speed can be limited
(variable).
Reversing switch action
For Model DA3000R only
This tool has a reversing switch to change the rotational direction. Turn the
reversing switch knob so that its protrusion will point to
marking for clock-
wise (forward) rotation or
marking for counterclockwise (reverse) rotation.
CAUTION:
•
The switch lever (paddle switch) cannot be squeezed with the reversing
switch knob positioned halfway between
mark and
mark. If it is
squeezed forcibly, the tool may be damaged.
•
Always check the rotational direction before operation.
•
Use the reversing switch only after the tool comes to a complete stop. It
will damage the tool to change the rotational direction before the tool
stops.
1. Switch lever
2. Speed control screw
3. Lock-off lever
1
2
3
004623
1. Speed control screw
2. Switch lever (paddle switch)
1
2
003018
1. Reversing switch knob
1
003026