- DL manuals
- Makita
- Chainsaw
- DCS 9010
- Instruction Manual
Makita DCS 9010 Instruction Manual
Summary of DCS 9010
Page 1
1 important: read this instruction manual carefully before putting the chain saw into operation and strictly observe the safety regulations! Keep this instruction manual! Dcs9010 instruction manual original instruction manual.
Page 2
2 thank you for purchasing a makita product we want you to be satisÞ ed with your makita product. You have decided to buy one of the most up-to-date chain saws. The makita chain saw dcs9010 is a high-efÞ ciency, modern chain saw for professional application, which can be used for cutting strong wood...
Page 3
3 3 4 5 2 1 delivery inventory 1. Makita chain saw dcs9010 2. Guide bar 3. Saw chain 4. Chain protection cover 5. Assembly tool 6. Instruction manual (not shown) in case that one of the parts listed should not be included in the delivery inventory, please, consult your sales agent. On/off switch sto...
Page 4
4 safety precautions general precautions - to ensure correct operation the user has to read this instruc- tion manual to make himself familiar with the charac teristics of the chain saw. Users insufÞ ciently informed will endanger themselves as well as others due to improper handling. - it is recomm...
Page 5
5 6 5 7 9 8 ● maintenance ● stopping work ● refuelling ● transport ● sharpening the chain ● putting out of function 3 meters fuels / refuelling - stop the engine before refuelling the chain saw. - do not smoke or work near open Þ res (5). - let the engine cool down before refuelling. - fuels can con...
Page 6
6 10 12 13 14 11 kickback - when working with the chain saw dangerous kickbacks may occur. - kickbacks are produced when the upper part of the end of the guide bar inadvertently touches wood or other hard ob- jects (10). - in this case the chain saw is thrown without any control and with high energy...
Page 7
7 15 16 17 18 19 45° 2 1 / 2 = cutting down area 45° - be careful when cutting splintery wood. Cut pieces of wood may be pulled along (risk of injuries). - when cutting with the bottom edge of the guide bar, the chain saw may be pushed in the direction of the user if the chain gets clamped. For this...
Page 8: Service
8 transport and storage - when changing your position during work switch off the chain saw and actuate the chain brake in order to prevent an inad- vertent start of the chain. - never carry or transport the chain saw with the chain run- ning. - when transporting the chain saw over long distances the...
Page 9
9 13 14 15 17 18 24 19 22 1 8 7 6 5 4 2 11 10 9 3 16 20 23 21 12 technical data dcs9010 identiÞ cation plate (12) indicate when ordering spare parts serial number year of manufacture stroke volume cm 3 90 bore mm 52 stroke mm 42 max. Power at speed kw / rpm 4.9 / 9,500 max. Torque at speed nm / rpm ...
Page 10
10 caution: before doing any work on the guide bar or chain, always switch off the engine and pull the plug cap off the spark plug (see "replacing the spark plug"). Always wear protective gloves! Caution: start the chain saw only after having assembled it completely and inspected. Putting into opera...
Page 11
11 - position the sprocket guard (g/2). Manually tighten the two fastening nuts (g/1). Tightening the chain - slightly lift the end of the guide bar and turn the chain adjusting screw (h/4) to the right (clockwise) until the chain rests against the bottom side of the guide bar. - continue to lift th...
Page 12
12 fuels / refuelling chain oil use an oil with adhesive additive for lubricating the chain and guide bar. The adhesive additive prevents the oil from being ß ung off the chain too quickly. We recommend the use of chain oil which is bio-degradable in order to protect the environment. The use of bio-...
Page 13
13 the engine must be switched off. The oil pump can be regulated with the adjusting screw (f/1). The adjusting screw is mounted on the bottom side of the casing. The oil pump has been adjusted to a medium feed quantity by makita. For changing the feed quantity use the universal wrench and adjust th...
Page 14
14 starting the engine d checking the chain lubrication c checking the chain brake do not work with the chain saw without Þ rst checking the chain brake! - start the engine as described (make sure you have a good footing, and place the chain saw on the ground in such a way that the guide bar is free...
Page 15
15 adjusting the carburetor (only for eu-countries) s s a caution: do not adjust the carburetor until the machine has been completely assembled and checked! Do not adjust the carburetor without a tachometer! Carburetor adjustment is necessary for optimum engine performance, for safer and more econom...
Page 16
16 working in winter in order to prevent carburetor icing in winter, warm air can be led from the cylinder to the carburetor. - use the universal wrench to turn the button (g/1) completely to the right. - now the carburetor heating is actuated. If the temperature is above 0 o c, the carburetor heati...
Page 17
17 c d files and how to work with them - sharpen using a special Þ le holder with a saw chain round Þ le. Normal round Þ les are not appropriate for this work. For the order number see accessories. - file the Þ rst cutter half with a 5.5 mm dia. Special round Þ le, then switch to a 4.8 mm dia. Þ le....
Page 18: Service
18 - after having sharpened the chain, the height of the depth limiter must be checked by means of a chain gauge. For the order number see accessories. - correct even the smallest projections with a special ß at Þ le (g). - round off the front of the depth limiter (h). - clean the inside, in particu...
Page 19
19 replacing the sprocket caution: protective gloves must be put on. Check the sprocket before mounting a new chain (a). Worn out sprockets (more than 0,2 mm) (b) may damage the new chain and must therefore be replaced. - loosen the fastening nuts (c/1). - pull off the sprocket guard (c/2). - take o...
Page 20
20 replacing the return spring replacing the suction head - demount the fan housing (j/1). - loosen the screw with the star-shaped recess (j/2) on the pivot. - pull off the pivot (j/3). - remove the cable drum (j/4). - demount the spring cover (j/5) (3 screws). - slightly knock the hollow side of th...
Page 21
21 cleaning the air Þ lter - demount the Þ lter cover (a/1) (2 screws). Caution: pull the choke (a/2) to shut the choke shutter and to prevent dirt particles from entering the carburetor. - loosen the two screws (a/4) and remove the air Þ lter (a/3) from the intake stack. - position a screw driver b...
Page 22
22 replacing the vibration dampers caution: always switch off the engine and pull the plug cap off the spark plug (see "replacing the spark plug"). Always wear protective gloves! Caution: start the chain saw only after having assembled it completely and inspected! Always replace all Þ ve vibration d...
Page 23
23 general work chain saw clean the outside and check for damage. In case of any damage have it immediately repaired by a service centre. Sprocket replace in time. 18 chain brake have it regularly checked by a service centre. Before each start chain check for damage and sharpness. 16-17 resharpen re...
Page 24
24 malfunction system observation cause chain does not run chain brake engine runs chain brake actuated. Engine does not start orignition system ignition spark malfunction in fuel supply system, com- only with difÞ culties pression system, mechanical malfunction. No ignition spark stop switch actuat...
Page 25
25 dcs9010 extract from the spare parts list use original makita spare parts only. For performance of repairs and replace- ment of other parts your makita service centre should be consulted. Pos. Makita no. Qty. Denomination 1 443 050 452 1 solid nose bar 20" (50 cm) 443 060 452 1 solid nose bar 24"...
Page 26
26 notes eu conformity declaration the undersigned, tomoyasu kato, as authorized by makita corporation, declare that the makita machines, type: 024 chain saw eu prototype test certiÞ cate no. Dcs9010 m6t 09 10 24243 104 manufactured by makita corporation, 3-11-8 sumiyoshi-cho, anjo, aichi, 446-8502 ...
Page 27
27 notes.
Page 28
28 form: 995 707 561 (2.11 gb) speciÞ cations subject to change without notice to Þ nd your local distributor, please visit www.Makita-outdoor.Com makita corporation 3-11-8 sumiyoshi-cho anjo, aichi 446-8502 japan.