Makita DCS 9010 Instruction Manual - page 23
23
General work
Chain saw
Clean the outside and check for damage.
In case of any damage have it immediately repaired by a
service
centre.
Sprocket
Replace
in
time.
18
Chain brake
Have it regularly checked by a service centre.
Before each start
Chain
Check for damage and sharpness.
16-17
Resharpen regularly, replace in time.
Check the chain tension.
11
Guide bar
Check for damage.
Chain lubrication
Functional check.
13-14
Chain brake
Functional check.
14
ON/OFF switch,
Safety locking button
Throttle lever
Functional check.
14
Fuel/oil tank
plug
Check for tightness.
Every day Air
Þ lter
Clean.
20
Guide bar
Check for damage, clean oil intake bore.
13
Turn it over so that the bearing surfaces are equally worn.
Replace in time.
Guide bar support
Clean, in particular the oil guide groove.
13
Idling speed
Check (chain must not run).
15
Every week
Fan housing
Clean to ensure a perfect cooling air supply.
For this the fan housing must be demounted.
19
Carburetor interior and
cylinder ribs
Clean, for this demount cover and protective cover.
Chain brake
Clean the brake band (sawdust, oil)
17
Spark plug
Check and replace if necessary.
20
Mufß er
Tighten fastening screws. Clean spark arrester screen
18
Vibration
damper
Check.
21
Chain
guide
Check.
Screws and nuts
Check their condition and that they are Þ rmly secured.
Every 3 months Suction
head
Replace.
19
Fuel/Oil
tank
Clean.
Annually
Chain saw
Check at an authorized service centre
Storage
Guide bar/chain
Demount, clean and oil slightly.
Clean the guide groove of the guide bar.
17
Fuel/oil tank
Empty and clean.
Oil
pump
Clean.
Carburetor
Run
empty.
Service, spare parts and guarantee
Maintenance and repair
The maintenance and repair work of modern engines as well as all safety related assemblies require qualiÞ ed technical training and
the availability of a workshop equipped with special tools and testing devices.
We therefore recommend you to consult a MAKITA service centre for the performance of all work not described in this instruction
manual.
The MAKITA service centres are provided with all the necessary equipment and skilled and experienced personnel to work out correct
customer solutions and to advise you in all matters accordingly.
Page
Instructions for periodic maintenance
To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be per-
formed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the
prescribed maintenance work can lead to accidents!
The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must
be carried out by a MAKITA service centre.