1 english (o rigina l in st ruct ions) instruction manual important: read before using. Cordless driver drill ddf343 ddf453 009075.
2 english (original instructions) specifications model ddf343 ddf453 steel 10 mm 13 mm wood 25 mm 36 mm wood screw 5.1 x 63 mm 6 mm x 75 mm capacities machine screw 6 mm high (2) 0 - 1,300 no load speed (min -1 ) low (1) 0 - 400 overall length 192 mm 214 mm net weight 1.4 kg 1.6 kg rated voltage d.C...
3 enh101-17 for european countries only ec declaration of conformity makita declares that the following machine(s): designation of machine: cordless driver drill model no./ type: ddf343,ddf453 conforms to the following european directives: 2006/42/ec they are manufactured in accordance with the foll...
4 power tool use and care 17. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 18. Do not use the power tool if the switch does not turn it on and off. Any power tool that cann...
5 enc007-7 important safety instructions for battery cartridge 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively sho...
6 the tool will automatically stop during operation if the tool and/or battery are placed under one of the following conditions: • overloaded: the tool is operated in a manner that causes it to draw an abnormally high current. In this situation, release the trigger switch on the tool and stop the ap...
7 before actual operation, drive a trial screw into your material or a piece of duplicate material to determine which torque level is required for a particular application. Assembly caution: • always be sure that the tool is switched off and the battery cartridge is removed before carrying out any w...
8 maintenance caution: • always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. • never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product safety ...
9.
10
11.
12 www.Makita.Com makita jan-baptist vinkstraat 2, 3070, belgium makita corporation anjo, aichi, japan 885264a221.
