Makita DJR181 Instruction Manual - Specifications
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model
DJR181
DJR182
Length of stroke
28 mm
Strokes per minute(min
-1
)
0 - 2,900
Pipe 130
mm
Max. cutting capacities
Wood 255
mm
Overall length
499 mm
449 mm
Net weight
3.7 kg
3.6 kg
Rated voltage
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual.
・ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE020-1
Intended use
The tool is intended for sawing wood, plastic and ferrous
materials.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DJR181
Sound pressure level (L
pA
) : 86 dB (A)
Sound power level (L
WA
) : 97 dB (A)
Uncertainty (K) : 3 dB (A)
Model DJR182
Sound pressure level (L
pA
) : 85 dB (A)
Sound power level (L
WA
) : 96 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model DJR181
Work mode : cutting boards
Vibration emission (a
h,B
) : 12.5 m/s
2
Uncertainty (K) : 2.0 m/s
2
Work mode : cutting wooden beams
Vibration emission (a
h,WB
) : 14.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DJR182
Work mode : cutting boards
Vibration emission (a
h,B
) : 14.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting wooden beams
Vibration emission (a
h,WB
) : 12.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Cd
Ni-MH
Li-ion