Makita JR103D Instruction Manual - Specifications
2
ENGLISH
SPECIFICATIONS
Model:
JR103D
JR105D
Length of stroke
13 mm
Strokes per minute
0 - 3,300 min
-1
Max. cutting
capacities
Pipe
50 mm
Wood
50 mm
Rated voltage
D.C. 10.8 V - 12 V max
Battery cartridge
BL1016, BL1021B
BL1041B
BL1016, BL1021B
BL1041B
Overall length
376 mm
386 mm
376 mm
386 mm
Net weight
1.3 kg
1.5 kg
1.3 kg
1.5 kg
•
Due to our continuing program of research and development, the speciications herein are subject to change
without notice.
•
Speciications and battery cartridge may differ from country to country.
•
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Cd
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for sawing wood, plastic and fer-
rous materials.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model JR103D
Sound pressure level (L
pA
) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model JR105D
Sound pressure level (L
pA
) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model JR103D
Work mode: cutting boards
Vibration emission (a
h,B
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: cutting wooden beams
Vibration emission (a
h,WB
) 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model JR105D
Work mode: cutting boards
Vibration emission (a
h,B
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: cutting wooden beams
Vibration emission (a
h,WB
) 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures to
protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Recipro Saw
Model No./ Type: JR103D, JR105D
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
The technical ile in accordance with 2006/42/EC is
available from: