Mediastar Evolution 775 Quick Start Manual - page 5
Quick Start Guide
Enablement Code
To upgrade the Encoder with an additional feature (e.g.
additional type of video encoder: MPEG-2/MPEG-4) a
suitable enablement code must be obtained from your
reseller or Cabletime. This 15-digit number is entered
into the fields on this screen. The Encoder will validate
the code and enable any appropriate feature. Note that
all enablement codes are unique to an individual unit.
Set Password
A password will prohibit unauthorised access to all
the Encoder configuration web pages, and will also
prohibit changes being made through the RS232, USB
or Telnet command interfaces (unless the password is
specified in each command). Valid passwords consist
of six numbers 0-9.
Software Upgrade
Encoder software may be upgraded to facilitate new
functionality or provide support related upgrades. This
screen enables hourly upgrade checks and specifies
the HTP file server location that the Encoder will check
for upgrades.
Locator Leds
The locator LED functionality causes the LEDs on the
front of an Encoder to flash in a ‘rippling’ sequence.
This allows for identification of a specific Encoder in
a multi-Encoder rack system. The location LED flash
duration is: /Off /5 secs/ 2 mins/ 20 mins.
Medias
tar E
volution
5
PART NO. 200-2360
775QSG_v3