Medquip MQ5600 Instructions Manual - page 6
6
Cleaning the Compressor
1. Wipe daily with a damp cloth.
2. Do not use any powdered cleaners or soap pads, which may damage
the finish.
6. REPLACEMENT PARTS AND ACCESSORIES
Contact your healthcare distributor for replacement parts or accessories.
1. Change the filter every 30 days or when the filter appears dirty and gray.
2. Changing procedure:
A. Remove the filter cover.
B. Replace the used filter with a new filter.
C. Replace the filter cover.
Filter Change
Caution:
Do not operate the compressor without a filter. Only use filters supplied by
your distributor. Do not wash or clean the filter.
Disinfecting
1. Use one part white vinegar with three parts distilled water. Make sure mixed
solution is enough to submerge the nebulizer, mouthpiece and mask.
2. Complete Rinsing Steps 1-3.
3. Wash nebulizer cup, mouthpiece and mask in warm water and a mild
detergent. Then wash them in hot tap water.
4. Submerge these parts in the vinegar and water solution for thirty minutes.
5. Complete Rinsing Steps 3-5.
Please follow the following steps to disinfect your nebulizer unless otherwise
specified by your physician. It is suggested that the unit is disinfected after the
last treatment of the day.