Medvibe NitroFit Personal + A16814 Instruction Manual - page 10
10
Copyright © 2015 by Medvibe
- 10 -
Operations
The NITRO FIT Personal + is very simple to operate. Turn the power switch located at the bottom of
the machine to the on position. Then use the LCD control panel as follows:
To Operate the machine:
Display Button functions:
1. "ON/OFF"-Activates manual operation and programs "P1-P5"
2. "PROGRAM" -Cycles through program options (Manual,FA,P1-P5)
3. "MODE"-Cycles through display options (SPEED, PROGRAM)
4."ENTER"- Confirms selections in the body fat reading program"FA".
5."+"or "-" - Increases or decreases vibration speed during operation,
adjusts pre-set timers, or height/weight/gender selection while in
body fat reading program "FA".
Display Layout:
The head unit is partitioned into 7 informational windows:
Window 1: Displays Program Selection, Gender Selection and Unit Selection
Window 2: Displays Meter Bars and Program Settings
Window 3: Displays Active Gender
Window 4: Displays Pulse
Window 5: Displays Calories Burned
Window 6: Displays Remaining Time
Window 7: Displays Vibration Speed Setting
+
1. Press ON/ OFF button to start or stop the machine
2. To Set up your work out time:
Press “MODE” to select ‘TIME” or "CALORIES" display.
Select "TIME"to set up your workout time. When you see “000” flash on the screen in window 6, you can
press “+’”(up) to increase or "-" (down) to decrease the timer from 1 to 10 minutes. Default workout time
is 10 minutes.
3. Set up speed(frequency) range:
Once the “ON/OFF” button is pressed, the platform will begin to move. You can adjust the speed range by
pressing “+’”(up) to increase or "-" (down) to decrease the speed(frequency) of your machine. There are
total 30 speed levels displayed in window 7.
4. Built-in programs: Before you start workout, you can choose one of the built-in programs by pressing
the button “PROGRAM”. You can see programs display in screen window 1 in sequences “P1-P2-P3-P4-
P5-FA”. The five built in programs have pre-set speeds that automatically change every minute. You can't
adjust speed settings in a program mode . To control speed settings use manual mode.
5. ”P1~P5”are built-in automatic programs.You can select P1~P5 and simply press the button “ON” to
enjoy a 10-minute workout,meanwhile you can see the profile display in screen window 2.