Meec 001-097 User Instructions - page 24
EN
EN
42
43
SymBoLS
Warning!
Read the operating instructions carefully before use
Double-insulated
Volts, alternating current
A
Amperes
Risk for injury to eyes Wear ANSI-approved safety goggles with side shields
Risk of hearing loss Wear hearing protection
Risk of electric shock Properly connect power cord to appropriate outlet
TEcHNIcAL DATA
Rated voltage
230 V / 50 Hz
Power
1,050 W
Unloaded rpm
480 rpm
Impact Rate
3,780 strokes/min
Wood Capacity
40 mm
Concrete Capacity
38 mm
Steel Capacity
13 mm
Chuck SDS-max
Sound pressure level, LpA
96 dB(A), K=3 dB
Sound power level, LwA
107 dB(A), K=3 dB
Maximum vibration level
15 m/s², K=1 5 m/s²
Always use hearing protection!
The declared vibration value, which has been measured in line with a standardised testing method,
can be used to compare different tools with each other and for a preliminary assessment of exposure
Warning! The actual vibration level during the power tool’s use can vary from the specified total
value depending on how the tool is used You must therefore identify the safety measures required to
protect the user based on an estimate of exposure during normal operating conditions (taking into
account all parts of the work cycle as well as the time the tool is switched off and when running idle,
as well as start-up time)
DEScRIPTIoN
1
Auxiliary Handle
2
Cover for filling of grease
3
On/Off Switch
4
Mode selector
5
Chuck
ASSEmBLy
NoTE: To prevent serious personal injury as a result of accidental operation: Release the trigger and
unplug the tool from its power outlet before adjusting the tool or installing accessories