Meec 010-315 Operating Instructions Manual - page 19
ENGLISH
19
ENGLI SH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use.
General safety instructions for power tools
The tool is only intended for household and hobby use, and is not suitable for commercial
purposes.
Failure to follow all the instructions below can result in the risk of electric shock, fire and/or serious
personal injury.
Save these instructions for future reference.
Work area
Keep the work area clean and well lit. Dark and cluttered work areas increase the risk of accidents
and injuries.
Do not use the tool in explosive environments, such as in the vicinity of flammable liquids, gases or
dust. Power tools produce sparks that can ignite dust and fumes.
Keep children and onlookers at a safe distance when using power tools. You can easily lose
control of the tool if you are distracted.
Electrical safety
The mains plug on the power tool must match the mains outlet. Never modify the plug in any way.
Never use an adapter with earthed power tools. Unmodified plugs and matching outlets reduce the
risk of electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators. There
is an increased risk of electric shock if your body is earthed.
Do not expose power tools to rain or moisture. There is a greater risk of electric shock if water gets
into a power tool.
Be careful with the power cord. Never use the power cord to carry or pull the power tool, or to pull
out the plug from the mains socket. Keep the power cord away from heat, oil, sharp edges and
moving parts. Damaged or tangled power cords increase the risk of electric shock.
If using the tool outdoors, only use an extension cord approved for outdoor use. Cords intended for
outdoor use reduce the risk of electric shock.
Personal safety
Stay alert. Pay attention to what you are doing, and use your common sense when working with
power tools. Never use electrical appliances when you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention when using a power tool can result in serious
personal injury.
Use safety equipment. Always wear safety glasses. Depending on the type of power tool and how it
is used, safety equipment such as dust masks, non-slip safety shoes, safety helmets and ear
protection reduce the risk of personal injury.
Avoid accidental starting. Check that the power switch is in the OFF position before plugging in the
power cord. Carrying a power tool with your finger on the switch, or connecting a tool to the mains
supply when the switch is in the ON position, increases the risk of accidents and injuries.
Remove Allen keys/spanners etc. before starting the power tool. Allen keys, or the like, left in a
rotating part of a power tool can cause personal injury.
Do not overreach. Always maintain a firm footing and good balance. This will ensure you have
better control over the tool in unexpected situations.
Wear suitable clothing. Do not wear loose-fitting clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose-fitting clothing, jewellery and long hair can get caught in
moving parts.
If dust extraction and dust collection equipment is available, this should be connected and used
correctly. The use of such equipment can reduce the risk of dust-related problems.
Using and looking after power tools
Do not force the tool. Always use the correct tool for the job. The tool does the job better and safer
when used at the rate for which it was designed.
Do not use the tool if it cannot be switched on and off with the power switch. Power tools that
cannot be controlled with the power switch are dangerous and must be repaired.