Meelectronics AF32 User manual - Multipoint

Manual is about: Runaway Stereo Bluetooth Wireless Headphones with built-in microphones

Page of 16

Download

Print this page

Bookmark us

MULTIPOINT

Multipoint allows two Bluetooth devices to be connected to the Runaway

simultaneously, providing additional flexibility for your multimedia experience.

1. MULTIPOINT PAIRING

To use two Bluetooth devices with the Runaway, first pair them by following

the pairing procedure described in the Pairing with Bluetooth Devices

section on Page 4 for each device and then turn off the headphone. Both

devices will need to be paired before multipoint can be used.

When turned on again, the Runaway will automatically attempt to connect to

the 2 most recently-paired devices, as long as they have Bluetooth enabled

and are within range. If a device that has already been paired does not

connect automatically, select “Air-Fi Runaway” from the Bluetooth menu of

the device.

If you no longer wish to connect to multiple devices, disable Bluetooth on

the device you do not want connected to the Runaway or remove the “Air-Fi

Runaway” pairing from the Bluetooth menu of the device.

(continues on page 10)

« ‹ Prev 7 8 9 10 11 12 13 Next › »

Summary of AF32

Page 1
User manual part of the series stereo bluetooth® wireless headphones model: af32.
Page 2: Package Contents
Package contents 1 runaway af32 stereo bluetooth wireless headphones charging cable (usb – 3.5mm) stereo audio cable (3.5mm – 3.5mm) carrying pouch user manual.
Page 3: Product Overview
Product overview stereo bluetooth wireless headphones right ear cup 2 led indicator light multifunction button ( / ) previous track button ( ) next track button ( ) volume down button ( ) volume up button ( ) headphone / charging jack microphone a b c d e f g h + -.
Page 4: Charging
Charging *** you must completely charge the headphone before the first use *** connect the usb charging cable to any powered usb port and to the 3.5mm jack on the right earcup. Make sure it is plugged in fully. Charge time is typically 2-3 hours. The red led light will stay lit while the headphones ...
Page 5: Turning On and Off
4 turning on and off to turn on, press and hold the multifunction button for approximately 3 seconds. The headphones will say “power on” and the blue led light will flash. To turn off, press and hold the multifunction button for approximately 4 seconds. The headphones will say “power off” and the re...
Page 6: Locating The Bluetooth Menu
Locating the bluetooth menu iphone, ipad, and ipod touch a) on your device, go to settings b) select bluetooth. If bluetooth is not on, turn it on. The iphone/ipad/ipod will automatically search for new devices android™ phones and tablets a) on your device, go to the settings menu b) select bluetoot...
Page 7: Controls
6 controls the runaway can control media and phone calls from a smartphone or tablet. 1. Adjusting the volume function operation notes increase volume press the volume up button when the volume reaches the minimum or maximum level the runaway will produce a short tone. Decrease volume press the volu...
Page 8: Controls (Continued)
Controls (continued) 2. Controlling phone calls (continued) status function operation call in progress, second ncoming call answer new call and put current call on hold press the multifunction button reject incoming call press and hold the multifunction button for 2 seconds until you hear a tone one...
Page 9: Controls (Continued)
8 controls (continued) 4. Additional functionality functionality operation notes redial last call* double press the multifunction button when no call is in progress headphones will say “last number redial” activate siri ®/ voice command/ voice dialing* press and hold the multifunction button for 2 s...
Page 10: Multipoint
Multipoint multipoint allows two bluetooth devices to be connected to the runaway simultaneously, providing additional flexibility for your multimedia experience. 1. Multipoint pairing to use two bluetooth devices with the runaway, first pair them by following the pairing procedure described in the ...
Page 11: Multipoint (Continued)
10 multipoint (continued) 2. Multipoint functionality status function operation media playing on one device play media on other device pause audio playback on the active device and start audio playback on the other connected device. It may take up to 10 seconds for audio to switch incoming call answ...
Page 12: Use As Wired Headphone
11 use as wired headphone the runaway can be used as a wired headphone by plugging one end of the included stereo audio cable into the 3.5mm jack on the runaway and the other end into any audio device with a standard 3.5mm headphone jack. Plugging the audio cable into the headphone will disable blue...
Page 13: Specifications
12 specifications bluetooth version 4.0 bluetooth profiles supported a2dp, hsp, hfp, avrcp driver 40 mm dynamic driver frequency response 20hz to 20khz operating range 10 m (30 ft) music playback time 15 hrs talk time 15 hrs standby time 150 hrs troubleshooting visit www.Meelec.Com/bluetooth for add...
Page 14: Notes
Notes meelectronics and its logo are registered trademarks of s2e, inc. All rights reserved. Iphone®, ipad®, ipod touch®, siri® is a registered trademark of apple inc. Android™ is a registered trademark of google inc. Windows® phone is a registered trademark of microsoft corporation in the united st...
Page 16
Www.Meelec.Com.