Meelectronics AF32 User manual - Charging
CHARGING
*** You must completely charge the headphone before the first use ***
Connect the USB charging cable to any powered USB port and to the 3.5mm
jack on the right earcup. Make sure it is plugged in fully. Charge time is
typically 2-3 hours.
The red LED light will stay lit while the headphones are charging and will blink
or turn off completely when the headphones are ready for use. A blinking red
LED light indicates a trickle charge mode, whereby the battery is charged
almost fully and the headphones are maintaining their current charge level.
Note: the Runaway cannot be turned on or used while charging.
INDICATOR LIGHT STATE WHEN CHARGING CABLE IS PLUGGED IN:
LIGHT PATTERN
STATUS
NOTES
Solid red light
Battery charging
Allow to charge for 2-3 hours
Blinking red light
Trickle charge
Ready for use
All lights off
Battery full
Ready for use
When the battery is low, the headphones will say “Battery low” every
60 seconds and the red light will flash three times every three seconds.
Apple devices such as the iPhone®, iPad®, and iPod® Touch will display a
headphone battery indicator when the Runaway is connected.
3