Megasat HD 510 User Manual - page 32
10
EN
5.1.2
EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled
programs seven days in advance for every tuned channel. Press
the EPG button on the Remote Control to access guide. You can
use the / key to select the preferred program. If there is more
than one page of information, use the BLUE button for page up
and the YELLOW button for page down.
Use the OK button to add the currently selected program to the
schedule list. The device will switch to this program automatically
when the time is reached.
Use the INFO button in EPG mode to open the schedule menu.
5.1.3 Sort
Sort your channels from the following options:
[Default]- remain the original order.
[By Encrypt] -Sort the channels in encrypt mode.
[Service Name]-Sort the channels in alphabetical order.
[By Freq] -Sort the channels according to the freq。
5.2 Video
Setting
To access the Menu, press MENU then select [Picture]. The Menu
provides options to adjust the video settings. Press / to select
an option and press / to adjust that setting.
Press EXIT to exit
the menu.
5.2.1 Aspect
Ratio
You must set the display format to either 4:3 Pan Scan, 4:3 Letter
Box,16:9 Wide Screen or Auto to get the maximum display when
watching TV.
5.2.2 Resolution
If the video does not appear correctly, change the setting. This setting is to match the most common
setting for HDMI.
[480i]: for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
5.2.3 TV
format
If the video does not appear correctly, you need to change the settings. This should match the most
common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
[Auto] : set TV format according to the stream automatically.